Search results

Needs a caliper rebuild by the looks of it too. Those dust seals will have let all sorts of crap in.

As i suspected ? http://www.btcc.net/2019/01/10/mini-challenge-to-join-toca-package-from-2020/?fbclid=IwAR3_zx_G_DrMj4gD6osNOyh6kZIpw3Tiqhvk1gRorFPtbisARhP_YO0qlVA

I'd just get some red caliper paint from Halfords and touch them up, doubt you'll be able to get a match.

Yeah, sometimes get the stop and battery light flicker if it's a dodgey connection.

The actual wire on the alternator or an earth cable.

This. Brave modding one to 300bhp still on contract ?

Yeah i would.

I'm sure they'll be decent being the race compound. Hard to say if they'll be better than the ZZR or V70a as they're both very good.

What does making the rear a lot softer do then?

Not much roll on the front then. Guessing they control roll from the rear then.

Good price that!

1000lb fronts! ? That's like 18kg ?

Bet you won't get much change from a grand.

It did confuse me for a minute.

Don't know if it's me going mad but on the pics the oil breather on the rocker cover goes from a 172 breather to a 182 setup ?

Could work, but as soon as you need to use a socket on the bolt it'll chip away the clear coat whereas acf would probably remain untouched with it being a surface coating that bonds.

Your garage must be drier than my car then ? When i say surface rust, i don't mean anything bad just like a dull orange tint forming.

I used ACF-50 on the self coloured socket cap bolts on my bucket seat sidemounts, they had started to get surface rust after only a week into being fitted! Just wiped a bit over the head and they still look like new.

Yeah it's the ecu one. That diagram has NO written on it which means NOIR i.e. Black. I'll have the white one on a diagram at home somewhere.

It says injection computer, so i'm guessing it's the ecu one. I'll have to check.

I've attached the list of pins for the 90 pin connector.

Check the connector wiring. If not, it's the throttle body.

It means electrical fault. Need to get it to do it again so you can scan it.

KAM Racing are the place to get them with the BC top mounts too.

Have you got a diff? If not, get one.

Yeah, the ktec series don't run any rear anti roll bars or anything. They go well too so it must be a decent setup.

The 750 kit only comes in one spring rate. 13kg front, 8kg rear.

The Spax 750mc kit for that money and spec.

New bush with circlip here if needed. https://www.renaultpartsdirect.co.uk/parts/transmission-parts/renault-clio-172-182-gear-selector-bush-with-circlip/

Be fine yeah. You'll probably break the bush getting it out though ?