Search results

My thoughts exactly . The engine bay looks spot on . All inlet manifolds , fuel rail guards tarnish over time , other than that it looks good to me .

Low , 52K and 8 and a half years old . Why ?

I reckon that's a bit of bargain , even if the belts do need doing asap . I'd have it if i was in the market for a PH1 . It looks pretty much mint , bodywork , wheels , interior from the pics . I don't understand the comment from boomerang2006 about the engine bay ? It looks alot tidier than my...

https://repairpal.com/OBD-II-Code-P0130-and-P0136 .It could be the sensor or it could be a broken wire on the sensor . I had the same a few weeks ago , on the post cat lambda sensor . The wires had got a bit bent and cause a slight crack in the sheath . I just fixed it with some insulation...

Lambda sensor . Or maybe you're running a decat ?

http://www.obd-codes.com/trouble_codes/ http://www.obd-codes.com/p0401

I've seen this problem mentioned before quite alot . I can't remember the solution . But i have these 7 LED 501's in my sidelights , been running them for about 2 years now with no problems and they match my xenons perfectly . So i Put the 2 spare ones in my interior light and i've never had...

Facebooks just gone for me as well .

Ahhhh right . Not just me then . Cheers for the info .

Is ebay down again ? I can't sign in . Tried resetting my password and it doesn't recognise my email address or user ID . Anybody else having this problem tonight ?

I'm assuming the hub and caliper are standard , as it left the factory ? If that's the case , then the only thing that has changed is the disc ? So it can't be the hub ? Maybe , and I've never heard of this happening before , the pad carrier on the caliper is ever so slightly bent ? Just enough...

Ahhh right , sorry . I misunderstood you about the 44 mm . So inside the new discs it's 36mm deep ? So what you're saying is the new discs sit 1mm further onto the hub , therefore catching the inside of the disc on the caliper / pad carrier ? I don't think anybody will have the answer mate if...

The discs look too thick . 44mm , when standard dsics are 24mm new . I'd say that was your problem . How can it be your hub that's at fault ?

You could do it yourself , probably with a fine paint brush . But the results won't be anywhere near as good as the ones from simon@sprayshack. I bought some anthracite ones with arctic blue lettering and the quality is absolutely spot on . Send him a pm ...

There should be some restrictions on the power of a car that inexperienced drivers can own / drive . And not necessarily based just on age . It should be based on experience , years on the road . For instance , you could get somebody who only passed their driving test in their mid 20's , is able...

Very sad news :(. My condolences to you and your family jayse182 . RIP

I think they mean the temp sensor under the air filter housing ? I might be wrong though . I think it's quite common for them to have a dodgy wiring / connection . I had this on my 182 when it was brand new , turns out it was just a dodgy connection , i gave it a good wiggle and problem went...

Ahhh i see . I didn't know your location . Have to tried ebay ? There are lots of leather repair kits on there mate . I don't think there is a colour code as such , you'd just have to try and source a colour that is the same as your own .

I'm going back a few years now .I had a guy from a company called trimline do a smart repair on a cigarette burn in in my 172's seat , he also recoloured the drivers side bolster which was slightly worn . It was like new after he'd finished , it didn't take him long at all . You can buy kits if...

Re: Is buying a cliophs1 172 having a full respray sunflower yel cheating or ok Personally I wouldn't . Too much expense to get it done properly . I'd either try and source one , not easy i know or just go for another colour . But , at the end of the day it's your choice , your money .

That'll be the one that i saw .

There was somebody on here a while ago , maybe 12 months or more i can't remember exactly now and they did replacement seatbelts in various colours . They also had a facebook page . I can't find either of them now though lol . So not much help . But they do exist .

+1 Even with one cable cut , if the dish is aligned you'd get a picture on your tv . The 2nd cable is only so you can watch one tv channel while you record another .

Down for me too . I thought it was just me , tried a few different browsers and still no joy .

I had the same problem a couple of weeks ago . I wanted to change my bullets but 8 and half years of s**t was holding them on . I took the black grommets out and pushed the side strip through the hole with a screw driver so it was lifting it off the door slightly and at the same time pushed the...

Yeah it's normal to still see some of the mesh gasket .

I'm pretty sure i read a few months ago on CS , that someone had fitted an arctic blue 182 bonnet on a cup or a mondial bonnet and an arctic blue 182 , not sure which way round it was now , but they couldn't tell the difference . To me the Mondial blue always seems to look slightly less shiny...

The higher the number , the more blue the light . Stick with 5000k and you won't far wrong .

Yeah that will fit , it's a D2S like chrisgti6 said . But why pay £75 for one bulb when you can get 2 bulbs for £10.50 ? I have the ones from hidsdirect and they are spot on . 4300k is oem , i went for the 5000k which are slightly whiter and brighter than oem .

Wheels not really my thing , but each to their own , individuality and all that . Engine bay looks so much better though , let down by the rusty engine mount/bolts though .