Search results

Check out autotrader mate . Plenty on there . Check the 3rd one down . £7990 , 05 plate with only 10,500 on the clock...

Like rich says , if they are deep you'll end up deforming the glass . We use jewellers rouge at work to polish fine scratches out of glass . http://search.ebay.co.uk/search/search.dll?from=R40&satitle=jewellers+rouge

You could try cam studio ! Pm me your e mail addy and i'll send it to ya ;)

If we lagged the steam pipes at work with carbon fibre i would have done , as we don't i had to accquire whatever was on hand ;)

^^^ Or maybe theres some insulation inside ;) ??

^^^ Its just the standard cup suspension , i'll keep my eye on it , see if it gets worse , just seems weird why its started happening now being 12 months old . Maybe the cold weathers got something to do with it :S ?

I know about the full lock problem . Mines started doing it just turning left or right , not even half a turn of the steering wheel . If i leave the engine running so it warms up for a few mins it goes away . But it's a loud knock / bang like somethings either catching or something might need...

My 182's just 12 months old with 8k on the clock . The past couple of days when i first get in the car there is a knocking / banging noise when i turn the steering wheel to the left or right , it doesn't have to be on full lock either . After the cars warmed up the noise goes . I don't think...

^^^ It depends on the quality of the divx you download . I never suffer any loss of quality converting back to dvd , takes a fraction of the time of downloading a full 4.7gb ;)

^^^ Knowsit ;)

The guys at Burnley Powerflow are very good :) They should be able to sort it no probs .

Online quotes from flux are "usually " higher than phoning and speaking to somebody . I'll always prefer to speak to somebody in person . Norwich union have always been pretty competative as well .Its just a matter of ringing round . You'll be amazed how much each company differs ...

Theres many factors taken into consideration ,it all depends on your age , years you've been driving ,ncb , postcode etc... on your quotes . Try Adrian Flux . http://www.adrianflux.co.uk/ Ashbourne . http://www.ashbourneinsurance.co.uk/index.htm Privilege ...

Its off the cover under the engine bay , you take it off to gain access to the sump drain plug .

6 X T -30 torx screws on top , undo them , lift the top off , old filter out new one in , job done ;)

Like Darthcake says its anthracite , paint colour is 205 -110 made my ixell . Halfords don't sell it and you can't buy it in aerosols from ixell as they only sell that colour for bodyshops . I used rover storm grey which was a close match ,Fred says Audi nimbus grey is a match .

^^^ Watch the price shoot up now he's posted it on here , lol ;)

According to Alex on serious performance , nattys blue is out selling the p21's . http://www.seriousperformance.co.uk/Products,51,toView_19.html Looks good on my arctic blue anyway :)

Yep . Thats a pc .

Or try this as a good alternative . http://www.polishedbliss.co.uk/acatalog/pb141protect.html

Don't forget your speedo will read incorrect if your changing your tyre size : http://www.alloywheels.com/tyrecalc.asp

I've had both toyos on my 172 , crap in the wet . Can't comment on the others though .

I prefer the microfibre applicators from carwashnwax . They are easier to hold than the little yellow foam pads , some people seem to think they soak up alot of product , but imho i think its negligible . If your using wax the wax stays on the surface , doesn't really soak into the applicator ...

As above WD40 mate .

Replace it yourself . Its a bit of a sod to slide the back cover off though . The battery is a cr1220 .

Don't forget to mix your coolant in the correct ratio 60% coolant 40% water . Pure anti freeze freezes at a higher temp than when its mixed 60/40.

You sure your getting the full 2mb ?? Do a speed test . http://www.thinkbroadband.com/speedtest.html Maybe try a different client like bittornado

Do you prefer the last touch to the chemical guys Alan ?

Yeah but rich's car never goes anywhere , lol . It goes from garage to drive and back to the garage . First time he's driven in weeks , yesterday ;) :quiet:

I had some similar marks on my old 172's side badges , i used autoglym metal polish , they came up a bit better but not perfect but if the autosol won't remove them i don't think the AG metal polish will . At the end of the day they are plastic thats been sprayed silver , not metal . Mine looked...