Search results

Someone had your pants down then mate?

Lol you must do if your remotely serious on wanting a 9k limit! Built right though you'd be able to approach a real 280bhp n/a though.

Got it in one! Flol!

As in f4r? Get your arsehole greased if you do! It'll cost you £££££'s to build a 9k capability.

I know mate! It only became clear just how big the crownwheel is when I fitted it, or at least attempted to!! Lol! Die grinder to the rescue to relieve the casing. Lol @30mph!! You'll be on the limiter at 30! In 5th!

That's your crank sensor mate.

@bashracing has spoken! The gearbox is his and will soon be destined for his 182. :cool:

= ££££'s!

Nothing to update I'm afraid, but I have been in the garage! The time spent in there has been used doing some odds and sods, but nothing cup related. Here's a couple of pics for you! Yes that crownwheel is funking huge! The casings had to be modified to allow the diff to turn! Lol! A bit of...

Because vagina? Lol

Allegedly mate yes, but I can't confirm 100%

Seems a shame to sell it, but I'm sure you'll make the decision that's right for you.

It doesn't break gearboxes either. Well not as much as a turbo conversion does! :wink:

You still could do tbh. Just take the turbo off and run the charger instead. You'll be able to run more boost as your on low comp anyway aren't you?

If my R3 engine goes pop or doesn't impress I'll be in touch for one of your kits mate. :up:

Yeah I agree! The twingo will have a far better safety cell/ncap rating. Back in the day we used to go round for laps in my mates nova. It was a c20let converted nova with around 280bhp and it took to the air over a hump at one of the fastest sections on the nordschliefe! If it hadn't gone...

Mine *should* have a bit more power than this, and the weight is nigh on the same, so in theory mine will have a bit more than 211bhp/tonne. Proof will be in the mapping! From what I've seen the conversion is relatively straight forward. It'll be the wiring that will give you the most grief...

Confirmed mate. He did a walk round of the car in one of his YouTube uploads. It's a cracking lap that he's done tbf!

I can accommodate. :wink: You'll lose less hp as well as the transmission losses are reduced. Another bonus is that you could get a nice long 1st gear, with the rest all nice and close.

I think if you got them shot peened and case hardened they'd last a bit longer tbh. No offer of a guarantee though!

Does anyone want a run down of the cost of the gearbox parts that I have? These are genuine Renault items and I think it will give a good insight as to how much it can cost to carry out the most common repairs. When I say gearbox parts I mean gearbox parts list btw!

Cost wise you need to budget for around 3.5k to get them supplied, fitted and mapped if you were to opt for the ktec itb package for instance. Work wise it depends on how good you are on the spanners yourself. They aren't anything difficult to fit though. Advantages are more power and you get...

Have you been in touch with dan about it? My advice is keep calm as it'll only be something small causing your issue.

They may be sheep wheels, but they're still one of the best looking wheels to fit on a Clio. All imo of course! Car looks great on them!

@Bear Head - I'd say it'll be the original rs2 that's going to be on offer buddy, just sold by 2 very good lads! And that's not a slur on James or Tom as when I spoke with James when he was selling them, he was extremely helpful. :up:

I can supply you a gripper for £1125 delivered if you wanted to retain the oe final drive, or £1525 delivered if you want to use a gripper cw&p. :cool:

It's a bolt in plate to replace the circlip mate. Far stronger than the circlip as well.

How much do they sell them for mate? The place in the eBay link I posted sells them singularly for £20 and the full set for £60

If it's got jc5 on the casing, it'll fit. However, the sport boxes are the ones with closer ratios. You could always fit the Megane jc5 106 5th gear as its more like a 4.5, or failing that build in a different final drive.

You could always contact @Russ_16v to see if he is able to price match. That's what I'd do.