Search results

im using GAZ coilovers at mo alot of people dont like them but i find them good alot better from standard set up :) Matty

im only plannin on doing the wishbones im already set up on coilovers and have front strut brace just want to tighten up the front that little bit more Kam racing do the wishbone kit for about £50 so think im going to get them ive seen on here that there are different sizes if i just tell them i...

hey is it worth changing my standard wishbone bushes to the poly ones??? Matty

you can wind the caliper back with out that tool a screw driver will do you just wind it anti clockwise or you can use a little bit of bar thats a maximum off 10mm wide Matty

on the 172cups when ur emissions light comes on disconnect the second lamba sensor and delete the fault codes and it will never come on again :) thats what i did work fine but doesnt work on the 182 due to they have a heater element in the second lamba sensor so its 50/50 it will either come on...

you can purchase a rear lower brace you can get them from demon tweeks for about £130 there for the mk2 my mate has one think best way to stiffen the front up would be anti rollbar bushes and wishbone bushes tbh Matty

ahh me did not know that bit odd tbh quite an expensive part these for only being 8mm thick lol Matty

hmmm hard to say first id shake and have a tug on the exhaust and see if it is the exhaust if no joy there then could be a shock but never known of them creaking before but theres a first for everything Matty

hey guys and girls right my issue i have is when im coming to speedbump or hit a pot hole (terrible roads round where i live) i get a gay clonking noise its either my top mounts or wishbone bushes what you people think?? im currently thinking of changing my wishbone bushes to the poly ones...

i couldnt imagine the compbrake top mounts to creak just make sure the tight id say it would be the anti rollbar bushes you just replaced try waking loads of copper grease around the bushes and see if that helps :) Matty

when i went into renault last year i got a quote of £200 for the pair including bearings and thats with no abs rings you can get them off your old discs and think i got a quote from GSF for £59 a side not sure if that included bearings Matty

i got mine from ebay :) Matty

just relocate ur battery to boot get a 45degree induction hose on with a viper or bmc with a cold air feed to the front be much easier and more they :) Matty

yep i got mine from hill power quick delivery and quality part Matty

thats different quite like that :) Matty

show off lol i remembe icarus sayin sumote like that a while ago but at the time didnt make much sence lol Matty

i love this Matty

if im rite and danny will agree with me the 182s have a dont have the the oil strainer going up into inlet manifold like the 172s do

ring gaz there based in essex and you can buy direct from them for £380 ive got a set and i think there mint my dampers are set hard at the mo and i dont find them that bad Matty

quade is using 10-50 and hes having no troubles and a good place to get oil from is www.opieoils.co.uk sign up as a cliosport member and you get some dollar off :) they do a good range of fuchs oils gulf competition oils mutol mobil castrol Matty

how much does a 172 cup weigh? ive had mine stripped for ages now where you recon best place to get it weighed?? Matty

thats so gay have you tried an easy out??? Matty

niceeeee Matty

that some serious dust build up poor car Matty

seeing that in some ways makes me wish id bought a ph1 now that looks sweet and tidy dude Matty

little direction and the rest lol Matty

hmmm i had a silly thing like this before on my 172 cup it was a vacum pipe Matty

if you have snapped a wheel stud then it should either knock out the back of the hub or it should just unscrew from the hub but if its a wheel bolt then i would have thought it shouldnt be to much of a problem to unscrew it out if it is a wheel bolt thats stuck in then id say the hub thread is...

ohhhh woops didnt notice that you was from turkey my bad when they polish it they use a proper polishing mop and i polish out the rough of the cast so its nice and smooth and looks really shiney to :) Matty

harsh but easy way chop it once off weld it back together Matty