Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Just to be clear, I wasn't saying your post was unhelpful, i meant mine was going to be haha.
To the OP, the drain holes are pretty small, and you don't realise they are there untill you actually see them. Stick a bit of wire up it, or a jet wash can do the job
Unhelpful post...
There is a guide to unblock the drain holes, they are in the sill, think there's 2 or 3 and not very big at all. I would link the post but im on my phone I'm afraid :(
IIRC you can't reset the TB, as it "sets" it self up every time you turn the key on. (you can hear it do it when you flick the key on), sure unread Fred/Sam/someone in the know say it
Right, basically it's now time for me to get a new car (people might remember the C63 thread I made a whole ago lol), and I need to sell the Clio.
Not going to lie, it does need a little bit of work, and I simply don't have the time at the moment.
Cars spec:
172, 51 plate.
Cobra alarm
88900...
Right guys, bit of help please.
I broke my 3GS screen start of last year, used it for about 2-3 months then it stopped charging. After that it lived in my drawer, until someone on here offered me a 3GS screen for cheap on here, so I took it and fitted it, and I noticed the data port wasn't...
Depends on a lot. First, check your dish to see if it has spare ports,it might have a 2way or 4way. If its the 2way, they are 20-40 quid, and easy to replace, but care needs to be taken while replacing. You SHOULDN'T need a telephone line, as you can get freesat cards to go in it (AFAIK), but...
That's what I thought. Expensive way of identifying patch cables haha, we just labeled them both ends and bobs your uncle, we also patched them in logically so you can guess what patch port its in
Haha, i used to install data cabling. Difference is i make it all nice and neat, and you just want it to f**king work.
Function over form, or something..
Think I'm gonna have to. It's going to the garage Friday to get the cv joint done, I'll get them to scan it while it's in and see if anything is there, other than that it's gonna have to go to Mick to get the cambelt done anyway
I did think this, but at the same time I thought it would be consistent, and not stop soon as the temp gauge is bang on middle. And that it will not go past 5.5ish when it does it, unless its all 4 plugs.
Now Iv thought of it, the car is occasionally a little bit difficult to start. I'll turn...
Perfect, will have to go down halfords and see if they have any in stock! Hopefully that does it!
Any specific tools you need to remove them? I read you need a torque wrench, is that true?
Cheers Russ, cleared that one up. Possible on the lambda?
I don't know on the spark plugs, owner gave a receipt for them, on which it only
Says "Bosch spark plugs 510"
Cheers guys
This is still happening, even with a full tank of V-Power. Now that I actually have some time to crack on with it im going to.
Someone mentioned plugs/leads breaking down, is there anyway to check this? And would it still affect it when the coolant temp is bang on middle on the gauge?
A...
"Finally onto what makes this car the best looking TT I have personally seen. This car has a full Audi R8 bodykit even has the raised rear side panels, the front headlights have also been changed to R8 LED light. The alloys are deep dish chrome with black centres..very expensive a lot have money...