Search results

Cheers for that - was a bit unsure as i think the Clio GTT thats for sale has no indicators! I wonder if he gets hassle? :confused: Is there any pics on the site of these cars with quads and relocated indicators?

Looking at the Morrette quad lights for my valver i notice that you have to remove the indicators that sit beside the headlights, ie with them fitted id have no front indicators! Is this legal or would i get stopped by the cops??

Ok i put my valver into the garage to get the vague steering fixed only to be told that it needed a new rack - that was last wednesday and im still waiting!!! Apparently its on back order from france so ill just need to wait but does anyone know how long this is likely to take? grrr!!

Dunno about the group A/N zorst m8! Ive got the same setup as you with full BB decat and think the next best option will be a stainless manifold (seen reports of up 8bhp with these) - i cannot see the group A/N zorst beating a decent stainless system with a manifold.... If i was you id rather...

Same here - particularly noticable through town but i thought it was down to my cams/chip etc. As a stop gap im gonna increase the idling speed a bit cos its a complete pain!

Hi, a few questions to ask about what air filter to use in my valver - basically, ive got the usual zorst/k&N combination but i also have a hillpower stage 2 chip, PBV and cams. I would have thought the K&N would be best option considering the amount of fuel i burn but is this case? Can the...

As said above, id try renault again but i think youd be doing very well if they change it for free - best case youre gonna have to pay for it m8. As for the aftermarket wheel, if you get the correct hub (£50), youll get a wiring kit to stop your airbag light coming on. Theyre simple enough to...

Aye - ive been seriously thinking about it these past few weeks but im not sure - nearly everything will have been replaced now and thats no joke - engine reconditioned, new clutch, zorst, suspension, alloys, cooling system and now the steering. Seriously - what else could go wrong? With all...

Cheers m8 but had to tell them to go ahead - the car felt too dangerous to drive in its current state and i need it quickly (stay in aberdeen and deliverys always seem to take about a week to reach me) :( Im sure this will be the last major thing to be done on it.......haha!

Dropped the valver off this morning to fix the vague steering, balljoints and some strange sqealing from the engine and just got the dreaded phonecall....needs a new power steering rack so total is £782!! Cannot believe it...everytime that car goes near a garage it puts me closer to bankruptcy...

CTRs? When will people learn? :cry:

Depends....obviously theyre gonna be compared to the valver/willy. In that case, you cant argue theyre more quiet/refined or i suppose softer which some might think is a bit more girly wheras as the valver/willy is more crude (serious performance and perhaps closer to a true racer) - its up to...

Cheers m8 - thats definately gonna be one of the ones on the list! Still undecided though.....the e-tech is rather obvious but could look evil, bad girl is really nice and the prima turbo (Maxi style) looks good on their turbo valver.... ...Dunno!

Have you got any decent pics of it on your car from a distance as k-tecs are a bit sh*tty?

Hi there! Once i get my 16v back from the garage this week im thinking of getting a new spolier on the back and im after peoples opinions on what looks good....Ive quite like the one that prima had on their turbo clio and im also thinking about an e-tech alloy job (as per my 1.4 had) but dont...

Car has done 127k now (and not with decent caring owners - story about that like!). I had the track rods done a few weeks ago which helped but now the balljoints are cracking like hell and i have some sort of belt slipping (power steering pump maybe - squealing only happens when the wheel is...

As seems a common problem on a few clios, the steering on my 93 16v is REALLY vague (i can point the steering wheel left and the car will still go in a straight line!) and im inclined to think it might be the column linkage rather than the rack but.... how much is one of these usually (supply...

Anyone?

Hi there! 2 Questions for you folks>> Firstly, I recently got 16" Prima Willy replicas on my 16V to replace the shabby phase1s but the trouble is that i still think that the wheel dont come out far enough. Does/has anyone fitted spacers to their car and whats the benifits dangers of...

i have the same problem on my valver. Ive replaced the trackrod ends so far which has helped a lot and the balljoints will be done soon as im getting a cracking noise when turning the wheel on first startup. After doing this there is far less play in the steering but ultimately ill be looking a...

Hi. My clio 1.8 16V some to do some sort of chirping noise on startup from cold but the noise only appears to happen when i move the steering wheel so i assume its something to with the power steering pump (and its getting worse). Can anyone confirm or has anyone had the same problem and what...

Here goes>>> Head gasket and clutch had gone so had the engine reconditioned (since it had to come out anyway), then found out the shocks, brakes were knacked so replaced them. Cooling system fecked so replaced. Gauges fecked so replaced alongs with the ultra-vague steering. Had the...

Thanks m8!

Hi there, the radiator fan motor in my 1.8 16v appears to have burnt out and ive been quoted 120quid from renault to replace it; however, im trying to get a hold of a secondhand one. Unfortunately, 16vs are few and far between beside me so would a fan from another renault be the same model...

All, the rubbing strip on my drivers side door is starting to come off - does anyone know what they are held on with (ie glue or screws) as i would like to remove them? Emmm....its a 93 Clio 16v

Ok, just got my valver back from its MOT and after a 40 mile run the battery light started to flicker. After i stopped at a bank and restarted it, the light came on and has stayed on permanently! Any thoughts on what this could be? I cant really afford another garage bill so any help is much...

Cheers folks! My car also has an overheating prob (new rad,stat going in this w/e) so think that with the K&N wont be helping.....

OK, i dont know if my fuel consumtion is normal so maybe someone can help. Basically i had my 93 Valvers engine reconditioned days after i bought it and have a de-cat stainless zorst, PBV, K&N, Cams, Ecotek, Chip and Pulleys installed and working well. The only problem is is that it seems to eat...