Search results

http://cgi.ebay.co.uk/Clio-Sport-172-Exhaust-Manifold-Upgrade-4-2-1-10bhp_W0QQitemZ330345153691QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item4cea1b049b&_trksid=p3286.c0.m14&_trkparms=65%3A12|66%3A2|39%3A1|72%3A1689|293%3A1|294%3A50 Just thought I would put up this link for...

for the front calipers, as in what thread and size would I need to order for replacement also are the rears the same?

can anything be done gents or should I just go straight to the wanted section and ask for some calipers. Fitted my rear braided houses fine and bleeded up no worries but when it came to the front . . . snap! lots of swear words later I think thank fook I tried to see if they were free before...

As above as just got myself a rstuner and dont know what weight to put in. Anyone ever had theirs on a weigh bridge with full interior if so please state weight and how much fuel and if you were in car any help appreciated . . .

As above, what sort of money do these tend to fetch. Is fully working with code . . .

As above after some sportlines soon, so was wondering if anyone else would be interested in getting a better deal. Any info on where people have organised a GB before and who with would be appreciative. Add names to list if interested and what car . . . 1. Riley (ph2 172) 2. 3. 4. 5. 6. 7. 8...

when i open it on my pc I cant actually ready any info. All the different sections are there but when I click on them I get 'The address is not valid'. Now I dont actually have a rstuner but will be in the future so Just want to read up Do i need to be logged in to do this? if not any ideas

First main question is will it fit? if not will a 10" fli fit? if not whats my options for the same amount of money for a active sub & box combo

http://cgi.ebay.co.uk/Wonderboy-Baseball-Bat-The-Natural-Robert-Redford-MLB_W0QQitemZ180345727420QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item180345727420&_trksid=p3286.c0.m14&_trkparms=72%3A1688|66%3A2|65%3A12|39%3A1|240%3A1318

Where from? and what sort of prices we looking at. Will be looking to go on standard shocks.

what you guys running for track. I'd like to go for 15's for obvious cheaper tyres and cheaper wheels. Did the cup racers use 15? anyone notice much different running 15's after going from 16's?

is this price quoted for a set http://www.balancemotorsport.co.uk/products.asp?recnumber=22273 if so dam that good value for money

As above, got a set of braided lines but with no copper crush washers. Have measured but cant decide between 10&11mm. Anyone order them before for the 172. What size are they please. Thanks in advance

Getting a new headunit for my bday, so just need to know what adaptors will I need for the following . . . link for headunit below if needed (a) connecting the headunit? (b) stalk control adaptor (c) Ipod connection, now I know it lists the CD-IU50 for this but at £30. Can I use a normal ipod...

bolt spacing for front suspension struts, what size is it guys? sure someone can tell me onhere

Just given the cup a service, wen to change cabin filter, looked under the cowl where i though it was located to find it isnt there, where is it guys . . . .

is it a case of sending them back to manufacturers or is there a company that does this sort of thing? aslo any idea on prices from anyone thats had it done already . . .

rite guys after a pressure washer for my motor, dont have a clue where to start so what can you recommend and why? budget is £200 tops thanks

just a quick one to see whether or not i will need new nuts and bolts where the cat joins the manifold. its a ph 172 btw and has covered 38k on a 53 reg. Do they tend to be seized like fook? or are they re-usuable?

as above where can I get one from. Im talking about the join from manifold to cat/de-cat. Before you say renault or k-tec I think there both over priced . . .

Just rang renault to be told they dont sell the nuts and bolts that link the manifold to the cat on my 172. They only sell it as a kit coming in at, wait for it £37 + vat ..... HOW RUDE! Anyone ever got them before or know the part numbers of them as im not sure i beleive you can only get them...

after launching it off the lights earlier every time i go over a bump or cats eye with my o/s front there is a rattle coming the o/s front area. Not sure weather its coming from dash or engine/suspension area. Any ideas, want to get it fixed its driving me nuts

this happened after launching it off the lights (somone thought there 2.5 vectra was the fastest thing in the world) now everytime i go over a cats eye or bump theres a like rattling/ tapping noise coming from the o/s front. My first idea was engine mount but would expect that to be more of a...

as above for my 172 ph2 cup so two sensors. Where did you get yours and how much did you pay

as above, rear wiper split today so wheres the cheapest place to get one? fairly sure i saw a member on here selling them at a reasonable price a month or so ago

http://cgi.ebay.co.uk/RENAULT-CLIO-RENAULTSPORT-172-CUP-BLUE-LATE-2002_W0QQitemZ200304008746QQcmdZViewItemQQptZAutomobiles_UK?hash=item200304008746&_trksid=p3286.c0.m14&_trkparms=66%3A4|65%3A1|39%3A1|240%3A1318

anyone done it? is it a case of a straight swop i.e same driveshafts etc. Anyone know if the speedo pick up is the same as on my cup

if the de-cat for a 182 manifold upgrade on a 172 is the same on a ph1 & ph2??? Thanks in advance

been reading a few cam belt posts and noticed a lot of you have aux tensioner done at same time as cam belt. going to be doing cam belt soon. Was just wondering if i should change aux tensioner at the same time. Its her first belt change at 35k on the clock so could i just do aux belt? is this...

Going to braided lines soon, and doing fluid aswell but just wondered what fluid is everyone using? How do they rate it and how do they drive car i.e on track/hard. I've heard good reports about ate racing blue . . . anyone tried it??