Search results

The plates just fit on the underside of the floor and pulled tight with the eyebolt, put a bit of silicone on it though to stop water getting in. Got the sticker off eBay, found someone who was selling a small one in the correct font and asked them to make a big one

For mounting on the harness bar you just remove the snap buckle and then wrap it around the bar (I used this guide ) and for the lap belts I used this guide http://www.msar.co.uk/pdf/UsersGuideRacingHarness.pdf for the angles and drilled holes in the floor and fitted the spreader plates and eye...

The picture is my 195/50/15 track tyres

I use the Skoda ones for my 18 inch winter/summer wheels and tyres and for some 15 inch track wheels and they are fine for both. No Skoda branding on them just Black and a logo for what corner they are for on the car Part number is ZGBUB000073900 Think I paid about £22

Now the engine is out take it to get belts and dephaser done would be much cheaper as less labour. Is the battery the powervamp one for £50 with bracket?

get them from JJC http://www.ebay.co.uk/itm/8-x-RSA-FIA-MSA-Approved-Harness-Seat-Belt-Eyebolt-Back-Backing-Stress-Plate-/371167531413?pt=LH_DefaultDomain_3&hash=item566b4f1195

Don't blame you keeping them, I would almost ready to buy a set from Ktec but my sensible head talked me out of it but if I had them in front of me they would be fitted. You could get a nice 2 post lift in there.

Welcome Best / cheapest way to do it buy one already done or most of the way there, I did mine myself and it has cost a lot more but I wanted it as a project. Have a look in the cars for sale there is a few in there.

Looks a good car and they are cheap for what you get, I will come and have a nose at Bedford

Wheels look good, you don't have much clearance on them calipers. I have my gopro on the rear cross, you can always change the angle to get the best picture set it up with the app then you can see what the camera sees on your phone without keep putting it on the computer.

I thought you were selling the ITB's?

It does settle a little lower that was just dropped down off the jack without moving it.

Thanks Mark

Cheers, they have come out really good

Nothing been done for a while but I have now had my one set of wheels powdercoated fluoresent orange :cool: they are very bright but the camera does not give a true colour every picture is different

:cool: Just test fitted my wheels that I have had powder coated, i'm pleased they are very bright but the camera does not give a true colour every picture is different

Oh like the look of that, wonder how long it lasts when charging a phone or ipad etc as it would also be ideal to take fishing

Nice looking car. As for numbers iirc the police are not bothered about them as they can identify the car easier, and rally cars are road legal and drive with numbers on

Good idea cheers Mark :smile:

Just got my wheels back from the powdercoaters but they did not mask the hub face or the bolt holes up :angry: so that has left me with a job to do. Any suggestions on what is best to clean the powdercoat from out of the wheel bolt holes, the hub mount face I will just use a DA sander and some...

I am picking my wheels up this week from the powder coaters so will see how the orange has come out, and if it is good probably get it done after Bedford the end of the month.

Its a road legal track car and everything is declared so all good.

will do :up:

@NorthloopCup yes I still have your number @Cub. I will have a look at your cage when we are at Bedford (from the passenger seat :wink:)

Yours was what gave me the idea. I still want to come and have a look at yours one of the weekends if the offer is still there?

I have a black safety devices cage, I have been thinking of having the cage powder coated Fluorescent orange as I have various parts sprayed that colour. I am worried it may be a bit to bright inside the car and cause reflections on the screen, anyone got a bright cage and what are your...

The PMS one with a single straight pipe would finish your car off

Stunning car but the twin exhaust spoils it

I got mine from a skoda dealer, same as the richbrook ones just black, £25

I have been using the MAPS one and they are good quality not had any problems with them and cheaper than PMS ones