Search results

RS bumpers are taller than Non-RS. when i parked next to Immi in the past, his looked well lower from the front on, but the coilovers were set wayy higher.

cant really tell from this angle like, but i took a fair bit off both sides, as much as i could....never had any rubbing or anything (7mm spacers, 195/45/16 tyres, -0.5 neg camber) (bearing in mind my archliners are now back in due to me going back to standard)...

hacksaw/file/knife........so its like an L shape instead of a triangle. il go and get a pic now, sec.

i dont know, i noticed it was touching it when i lowered the car down after fitting, so i just got rid straight away i removed quite a bit, il get a picture tommorow.

195 tyres are slightly thinner yes, i still had to run spacers to clear the shock though (but i had a bit of negative camber) so it wouldnt rub on the outer arch

he dosent, the coilovers have adjustable camber, the holes are slotted. They were on my car.....camber adjusted:

the front bumper? the bracket is like a triangle yeah? i used a hacksaw and cut it down to the smallest shape possible, then never had any problems

lol ;) its so wierd driving a standard car, lol! 195, the width of the tyre is changing. they have adjustable camber because the holes on the shock that go through the hub are slotted, allowing camber to be adjusted.......i set the coilovers to max negative camber once... so i know its...

the coilovers dont need camber bolts, they have adjustable camber. 195/45

So you probably have realised from all my For Sale threads the car was changing. Well here it is this afternoon: 100% Standard (bar the colorcoding/cup spoiler, which are staying). Anyway, its time for me to move on to a new project, that will go quicker, and can be messed around with...

yeah, as soon as the wheel was off the floor it stopped dead, was wierd to see, even wierder to catch it just at the right time on the camera lol

need a better technique imo....im still not happy with the quality of the bulk of them, guess practice is the only way

i was all over at different points just doing bits and bobs, left around lunchtime

which one was yours dude, thers another 400 odd pics to sort through yet

i stood there waiting for you to pass something at the right time to get a pic, lol, didnt realise i got it twice!

great pics....what lens for track shots?

got bored of holding the camera straight tbh :)

http://www.jordan-fox.com/image/image_normal/oulton_park_20th_august_2008/1137.jpg http://www.jordan-fox.com/image/image_normal/oulton_park_20th_august_2008/1100.jpg http://www.jordan-fox.com/image/image_normal/oulton_park_20th_august_2008/1145.jpg...

IIRC ive seen loads of pics on here from when matt black did the swap of styles on the TT when he had it, looked like a fair bit of work structure wise where the slam panel goes together etc, not 100% though, and dont know where the pics are now

unscrew the negative terminal from the battery and rest it to the side...

edit: boosh beat me, meh! the cliott was changed from ph1 to ph2 front end, nothing will ever line up properly iirc, the headlights didnt for sure

you put the custom springs on straight away then, lol ;)

not seen the guy yet, lol rimstyle/or/europerformance i think i saw it

i didnt struggle with speedbumps at 100mm..... FK highsports cheapest i rekon, 420ish delivered iirc

strip the wires, solder the resistor onto the wires...

hmmm dosent seem to have any snapped off bits on the switch, looks inact. Ive just found a PDF you posted a while back bmh, i can see where it goes now.....il have to have a look for a rivet later

bump....lol erm....ive fully refitted the interior, and this switch had come loose from somewhere....cant figure where it reattaches, dosent seem to have any holes for it to screw in etc......does anyone have a diagram or picture of where it goes onto the runner? thanks!

thanks......off to renault now :p

bump

Just after a few part numbers from someone if possible, my dialogys wont work. 1. Archliner Screw 2. Archliner Plastic Clip? 3. Indicator Bulb Holder (Front) 4. Standard Headlight Rear Cover 5. Archliner Clip (Some Other Random One): 7703081056 Ive got the part number for the...