Search results

Mate, i'm 41 years old, I only have (assuming I make it to average life expectancy) about 360,000 hours left to live. I do not want to waste any of those trying to cold start/hot start/set idle/set mixtures/generally f**king about with 40 year old carb technology when for a fairly low amount of...

Yes mate the 9 or 11 Phase 2 disc axle or the Renault 19 disc axle is a straight swap with associated ancilliaries, but I decided I wanted to keep the original hubs and a decent handbrake. This will never be a balls out performance car, just an old skool cool motor that you dont see around any...

I had to punch the pin out, then tap a thread on it and fix it in with a nut - I was fecked if I was hunting down the EXACT right shoe or EXACT right fitting pin Once i'm sure it's all right i'll dab a bit of weld in the middle of that nut to make sure it doesn't drop off. I sized it up on...

Sunday I had the 'chore' of a round trip to south wales to pick up a Megane 225 package to dump in my 197. Hmmm.... it would be fun, wouldn't it? Anyway, once that was done I did a bit of the back axle, wizzed a knotted grinder wheel over the hubs Dusty! Coated with bilt and left to...

Started prepping the new tank I got from Big Steve, as it had some surface rust. Quick squizz with a wire wheel and treated with bilt. Thats better. I'll paint it too but first I need to make sure the inside is clean and treat the little bits of surface rust inside....problem...

I thought V6 YEP was on an Acid Yellow phase 2.... what colour was the car you saw? YAY was won in a raffle for the cost of a £17.50 ticket Raffle link: Owner on the V6 forum

This.

If you fancy a good nerd session the posts from "PumaRacing" on this thread are very interesting. Bit of reading for your next lunchbreak/skive/poop :D https://www.pistonheads.com/gassing/topic.asp?h=0&f=66&t=1087429

Going back a few years but i'm pretty sure I read some research on this and it was determined that there was no benefit in a port, and that dimples only work on a golf ball because they create a thin turbulent layer of air that clings to the ball's surface allowing the smoothly flowing air to...

"For sale: Brake shoes and wheel cylinders for a Renault something but not a 9 Turbo. £100 the lot" :D

Slightly irrelevant but I was forced to go to Cadbury World (not so much a novelty when you work for Cadbury in Bournville) and amused myself with some chocolate art. Then some parts arrived, not usually worth posting but i'm loving the retro/old skool boxes lol :D Asbestos free! So...

Oh...yeah, the rear axle is on hold because both the wheel cylinders are wrong (bolt spacing wrong) and the handbrake shoes are wrong (right diameter, wrong fittings in the metal shoe body) F**ks sake! Stupid old cars and idiot ebay listings. I mean, I'm grateful new stuff is still available I...

I'm sorry at what point above did I indicate that I have a budget big enough to run Kerry Katona's coke habit? :D Just messing mate. It's do-able of course but the payback isn't there to make it worth while. I've done enough research for R21 parts to know that scanning and compiling digital...

Movement on two long term avenues of investigation this week. Hardly worth an update you might think but when it's taken me literally months - almost a year in the second case - to get to a point where I have confirmed orders in transit the excitement gets a bit much lol I have sourced some...

I'll tell you why this can't happen. It's because I would end up spending all my holiday money on a Renault 9 non rusty drivable heap, fill it with bits, send her and the kids home on the Plane and drive myself back with my stash of goodies. Well I currently have a grille and 2 back lights...

Will do, thanks!

Mate, I have a Clio V6, which is s**t to get parts for BUT as long as you are prepared to pay (and I mean eye watering money) most stuff is gettable. I also have a Renault 21 Turbo Quadra which is a real struggle now, new stuff is mostly gone. Then...the 9 Turbo. I'm currently about to pay a...

Well, you know, I didn't buy one to leave it unused in a cupboard :D Bilt Hamber Hydrate 80 https://www.ebay.co.uk/itm/Bilt-Hamber-Hydrate-80-Rust-Killer-Barrier-System-500ml-bottle/181191937689?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

To refit the mounts to the axle I went with an M10 threaded bar to pull the stud in, like so In the end it wasn't man enough and stripped the nut thread at the point shown below, so i dug out some fine pitch M12 stud I had made to long-stud a 21 Turbo block many moons ago and used that, and...

Saturday I treated the inside of the box where the bottom of the axle mount had rotted away Then I painted the axle black, and while I did it had a good old think about how to handle the refitting of the bushes (Yes, continuity error here as the bushes are already in, get over it :P ) I...

Hahaha this is cute, give it another ten years and see how much the few and far between new bits are going for. Hoard now, stash it away, believe me.

My boss commutes in a C63 AMG 507 edition, 6.2L V8. Weekend car is a V8 Ultima Can Am. Guess he likes V8's! My daily (S60 D5) is pretty yawn, but in a good, comfy way :)

Wrong way around. Somewhere to escape from the feckers without having to leave home :)

The diagram doesnt split the bush out from the metal bracket that attaches to the car However it looks the same so for the cost of one it's got to be worth a purchase for a look-see :) I havent fitted mine up yet though so i'll feed back when mine are in. Link...

Strength and reduces cylinder vibrations and flex IIRC.

Would depend on whether it's 2 or 4 bar torsion beam. I'll check the part numbers for you, whats the oval plate of your valver?

I can only imagine how totally hideous it would be to drive in traffic, not to mention the law suits from the people it's just gassed with toxic fumes!

I investigated further, and what i think has happened is that water gets in between the axle mount and the bottom of the car where its rotted and doesnt dry out very well. Its eaten through from the outside to the inside. Where the axle is bolted tight against the bottom of the car where...

Cardboard template, cut it out and bent it, trimmed and welded in. Still struggling with neat welds, bit frustrated tbh I should be doing better than this. Back edge is a bit better Then on Sunday did the rear axle with some nice thick primer over the Bilt Hamber I had another 40...

On with the axle, back from blasting so I attached it with Bilt Hamber Hydrate, I like this stuff. Saw someone else using it on TurboRenault. Left to cook, 24 hours at gas mark 0.1 :D In the mean time I hacked out this bit of grot on the back chassis rail where the fuel pipes cross through