Search results

Oem renault steel sumpguard on mine.

Looks decent for the money, its had all the right bits of maintenance done.

Yeah the oil should be moving when engine is running. Im unsure if it will cause a problem. Probably worth checking level whilst sump is off with a few ltrs of water to see where it sits.

White

Daft question but is the oil return above oil level?

Run Cup2 connect on my kangoo. Doesnt take much to switch them on, and wet grip is suprisingly good. You will have no problems running them on the road. Ps5 are also worth considering. Turn in is really good as stiffer sidewalls over ps4.

Cheers mate. Its getting there slowly :)

I was expecting the same mate as seen it a load of times on the r5gtt's. Not done loads of miles yet but up to now seems to be ok touch wood!

Its not the best mate. I probably should have sorted this whilst subframe was off but had so much other stuff to do so left it.

Cant go wrong with silver on silver. Looks nice and fresh.

Updates. In earlier updates i changed the lower part of the turbo return pipe due to oil leaking onto the manifold. Not enough for massive concern but enough to cause a whiff of oil when pulling up at traffic lights. When lower part of oil return pipe was replaced, noted chemi metal all over...

Superleggeras look class.

O.e or aftermarket? All made of finest chinesium thin steel now i guess. On the older cars they used to stick closed which was bad so id say breaking or sticking open is the better out of the two, but still sh*te.

Change the ecu and loom to f4r as i cant imagine it running well with stock k4m ecu

Updates Super busy but managed an hr on the r26 today to sort the drivers side window. The window was working when i bought it but failed. Stripped it down and briefly worked when the wiring was moved. Assumed temic module or motor was knackered so stuck it back together and purchased a 2nd...

Cheers sir! Its coming together slowly:)

Quick enough at that power to have loads of fun.

I was going to suggest modifying the scale in hex as seen it done on meg rs. Certainly interesting stuff mate, i quite enjoyed doing a bit of that on my kangoo immob chip.

Sold my old front sachs for £700 in similar condition, no springs or top mounts and needed refurb. £500 is cheap for a full set with springs. From what Haswell said he wasnt impressed with them either, reckons the bilstein b14s that are fitted now are just as good, if not better.

Always screenshot any settings or take a pic just incase it goes pete tong :LOL:

Done a bit more today. Bumper undertray was missing which was not helping with airflow to the rad pack. Expensive as fcuk to buy new for a flat bit of plastic and unobtanium 2nd hand unless buying a full bumper. I bought a povo spec megane bumper undertray which was no where near when offered...

Ahh good old french shorthand on Renolink. I too have accidently lost settings doing simillar on the r26, dash was like an xmas tree for a short while :LOL:

Macro run today. Stripped out rear is perfect for the chicken, crisps and sweets run :LOL: Still getting the odd whiff of oil looks to be leaking slightly on the turbo oil return gasket or top part of the oil return where it had the chemi metal bodge. Had it on my mates lift looking earlier...

Updates Whipped bumper off in dinner hour today to sort light issue out, first day its not been raining and actually had time. Annoyingly passenger dipped headlamp which had totally failed was working again which made diagnostics tricky. Fitted new 6000k D1S bulbs and a new ballast to...

Cant see it myself. However, stock meg manifold flows alright so id stick with that on the td04 hybrid turbos. The megane hybrid turbos are not the most reliable overall though, what boost pressure is it mapped for? Oil pressure and flow decent to the turbo? Any boost leaks making the turbo...

Lsd is a great upgrade for road use.

Quaife lsd.

Vehicle speed not available seems to flag up quite often but no warning light. Id say its a safe bet its sensor or wiring issue if the other one wont clear.

Yeah prob wiring issue that. If abs block has power and ground, and can L & H connected to the canbus should show up.

I dont think abs module are coded on clio2 mate. Prob just get away with plug and play on it