Search results

All you need is vehicle speed from the stereo wiring of all places, and rpm from your standalone ecu. Theres a load of info on this post. https://cliosport.net/threads/epas-fault-help.841005/

No oil temp sensor on 182 as standard. Regarding temp, all you can view on obd is coolant and air intake temp.

Full send @Adey. If it breaks it breaks

Updates Fitted a set of my compomotive mo6 with new michelin ps5 mid week. Loving the look over stock wheels. Planned on taxing it on the 1st and taking it for a ride out. As i cant leave nothing alone i investigated the strut top knock on Sat. There is a small spacer which is missing and the...

Great job. Its not easy to decode the canbus stuff.

Whats the problem exactly. Does the starter crank? Has the immobiliser emulator been verified working?

Manifold looks class.

Thanks all. Took it out for a test run and all is good regarding handbrake. Theres a slight knocking on the passenger side front, i reckon its the spherical bearing in the compbrake top mount or the anti rotation link as i fitted a good used pair i had i stock which were tight, but maybe not...

Sunday update. Not had much joy sourcing a used handbrake guide tube. New oem NLA and its 50/50 chance a used one will be useable. As this is a guide tube it has no tension on it so just guides the cable via rear footwell into the centre console. Its quite a basic tube so had a go at...

Cheers mate. Its finally coming together and the list is getting shorter.

Solid plans. The bridgecraft/northloop roll correction kit is excellent, you wont be dissappointed with that. Whats the engine spec?

Looks class. In for updates

They are megane 225 f1 team trendlines.

Sat update. After being awaken at 730am by the postie knocking on the door with car parts decided to do a bit. First job - fuel hose. The short bit of plastic pipe from fuel rail to metal section had been replaced in the past for rubber, common repair for meg when original plastic pipe fails...

Updates. Snuck an hr in this afternoon. Headlamps were looking a bit cloudy so give them some tlc. Before Mid way after wet sand After a few passes with the DA. Pissed down straight after finishing so not coated them yet, ill do that tomorrow. Also the last fuckwit who fitted the wipers bent...

Great updates, keep them coming. Been following progress on instagram, looks class.

100%, the 172 cup racers looked mega in white.

Looks spot on. White is quite a rare colour.

Forgot to say had a carry on with the radiator. Rad was leaking so changed it for used oem that i had in stock. Id done due dilligence and filled it with water to check for leaks and it didnt appear to leak? Flushed cooling system throughly and a load of shite came out. Filled with coolant and a...

Updates Been a little slack on updating but progress has been made. Got trackrod ends on through week and refitted abs sensors/cable holders. Everthing new Lower dogbone mount was kaputt so renewed. Ive alson fitred yellow powerflex insert to top engine mount. Checked cambelt whilst there...

Excellent footage @MarkCup Definitely need to look at suspension setup on the Kangoo, found it hard to pedal it, but had mega fun for first use in anger!

Not a lot you can check without stripping the box down. Wise getting one in stock if your planning on using it hard.

Febi bilstein bushes are ok if you want oem replacements.

Normal in warm weather, coolant comes up fast which is good As @JamesBryan said above, the gauge comes up to half way around 50 deg iirc and stays there when everything is ok. The needle does not move about even though the obd temp is moving quite a lot, same on most cars these days.

Ohh mate shes a nut job, shes next door but one. My neighbour has a loud family but just kids doing kid s**t, i cant hear it. Anyway neighbour has helped out crazy lady loads of times and even got her a small job and she goes and reports him for noise pollution. I had my music on mid day ages...

Assuming they are not bent then should be ok. The bushes are press fit hammer usually wont cut it on these.

Cheers mate. Went as big as i realistically could when i built the garage. Now its filled with cars i wish id pushed it out a bit furthur as always working outside. Not ideal in winter! I heard one of the neighbours was moaning about it recently - how many cars i have etc. Fat gobby woman who...

Id refurb oem so you have the correct castor. Stick some powerflex bushes in and new balljoints. Paint or powdercoat finish. The bushes arent too bad to get out. Press, vice or burn the rubbers out and carefully cut the outer sleeve so it just needs a tap to knock it out.

Updates Had a good day on the hovercar yesterday as named by @SteveC_1879 :LOL: First job was to fit drivers side strut and hub. Then get stuck in and get the subframe off. Gear all over. Subframe area did not reveal any nasties. Can see people have been here before as the bolts werent...

Updates. Blue dci up to 174'500 miles so done 3k in 7 ish weeks. Been all over with work, it just cruises along with no complaints..ac working beaut in the heat, 69-70mpg all the time normal driving. Its looking well used/mucky and headlamps faded so yearly polish time, its dark season coming...