Search results

That time sounds decent to me mate. You were on slicks weren't you? They would help massively. We don't have that luxury!

Yes, GP circuit. Best was a 1.49.2. What was your turbo monster doing? Sent from my iPhone using Tapatalk

Donington Well, what a weekend! As anyone who has read some of this earlier thread, 3 years ago I rolled the car in the gravel trap at the bottom of craners after a power steering leak covered the rear tires with fluid. Then 2 months later after rebuilding the car we returned there only for the...

Glad you enjoyed the videos. I think you’ve got my blog mixed up with someone else’s though as I have the standard pedal assembly. Sent from my iPhone using Tapatalk

The numbers look right. I think you’ve been lucky! Sent from my iPhone using Tapatalk

Ready for Donny!

Sent from my iPhone using Tapatalk

The nylon cup, circlip and rubber piece are all sold as a set. Sent from my iPhone using Tapatalk

Part 13 in the second picture is probably what you’re after. Renault do this as a kit. Sent from my iPhone using Tapatalk

The new fibreglass bonnet and newly replaced passenger door are being collected tomorrow from being wrapped and they will be the last peices to go back on. I've also modified the front bumper and grill. Mainly to give the centre of the grill more rigidity as there is no slam panel anymore and I...

So, 2 days to Donington and realistically only one day left to get any prep done. The current weight saving phase is complete with the rear Lexan screen going in this evening with the help from my friendly neighbourhood National Windscreens man! The doors are now finished with the longer...

This first one is footage from another car of my co-driver pedalling against another Clio. This was on the old set up and the car was a handful as you'll see. 110Nm on the front and set to full stiff. and 10' toe out shims on the rear plus PMS ARB set to a mid point. On R888Rs on Speedlines...

Only in-car footage. Let me know if that helps and I'll post it

The only significant movement in the hoses is in the engine bay so I think you'll be fine making the rest of the run in one piece. I've also run lines to a swirlpot assembly in the spare wheel well which are also grommeted. It's all been fine.

90nm on the front is still pretty soft. I ran 110nm for a couple of races before going up to a 130 with a revalve. Mikes better now, but then it is a race car. For a road/track car 110 probably would have been fine though. Corner weighting may also help you but it sounds like once AST get their...

Yep I ran straight through with a grommet. In fact my lines run uninterrupted all the way from the tank, up into the scuttle through another grommet and then to a bulkhead connector at the panel above the master cylinder. I’ve not had any problems with this so far. Sent from my iPhone using...

You can buy Athena head gaskets in varying thicknesses, although I doubt you’ll see much difference in the behaviour of the engine with that amount of skimming anyway but if you want to be sure go up to a 0.75 or 1mm. If you have the engine apart it’s relatively simple to calculate the CR by...

Have you checked the gearbox mount? With the bolt snapped on the engine mount it’s possible the extra stress on the gearbox mount has also damaged that one. Sent from my iPhone using Tapatalk

Check both your belts. I wouldn’t drive it like that, it sounds like a failed bearing possibly on a tensioner. But I recon you’ll see something out of place pretty easily, it sounds that bad. Sent from my iPhone using Tapatalk

But not Paddock Hill bend [emoji6] Sent from my iPhone using Tapatalk