Search results

ahh ok thanks for your help

is the cig lighter always live? i saw a post on about something that it only works when the ignition is turned on? ​thanks for the reply

i want to fit led strip lights in my footwells, im going to wire to the interior light so it comes on when the the doors open and they go off when i close the doors but i also want to fit a switch to also turn them myself, im going to them to the battery or fuse box if theres a outlet in there...

​it comes with the 3m kit

Put a bit of wood between the piston and the inner part of the caliper, leave the bleed screw in and use compressed air in the brake line hole and it should slide out Don't put your fingers in front of it as your blowing it out though There's a few videos on YouTube about fitting the piston...

There's r-tec in St. Albans. Not that far from Essex http://www.rtecshop.com/shop/index.php

there brembo max with the grooves, not hc's which are just plain standard disc's

pagid discs and pads for just over £50 http://www.ebay.co.uk/itm/230929373865

Studs are are like are £1, nuts are the same

Would studs be better? You can loctite them in the hub and shouldn't come undone

Fit it and just tighten it when it's back on the floor

any updates on this?

engine dynamics are in essex http://www.engine-dynamics.com/

dan@519automotive is closer, hes in bedfordshire

​it should have a part number on the back of it

Did you twist around the wires coming out of the steering wheel when it was off?

£987 inc vat ;)

Just looked at the photo on the listing it shows its blue, I would have thought it will be ok

Red would be to strong you wouldn't get it again unless you used heat, they come with blue thread lock on iirc http://www.halfords.com/webapp/wcs/stores/servlet/ProductMobileDisplay?catalogId=10151&storeId=10001&productId=199363&categoryId=255230&langId=-1

Done it in the end, with the help of a bar pushing down the wishbone. Was too hot yesterday to do it really

hello im currently trying to fit my sportlines, but im having some bother. i cant foir the life of me get the damper and hub bolt holes to line up does any body have any ideas what im doing wrong, ive got both wheel's off the floor matt anyone local to Stevenage area able to help?

Looks really nice, needs rallye steel's instead

Carparts4less part number for track rod end is 606745275 606745285 £14.10 each for lemforder

i bought these, thicker than standard http://www.ebay.co.uk/itm/8MM-RED-SILICONE-IGNITION-HT-LEADS-WIRES-RENAULT-CLIO-172-182-CUP-2-0-16V-MLR-CK-/121123096817?pt=UK_CarsParts_Vehicles_CarParts_SM&fits=Model%3AClio%7CCars+Type%3A2.0+16V+Sport&hash=item1c337fc8f1

on kam racing they give this part number E10-75-001-02-22 for the pro kit for the 172/182 http://www.kamracing.co.uk/car-tuning/renault/renault-clio-mk2/suspension/springs/eibach-pro-kit-springs-renault-clio-mk2-all-exc-1-2.html ​

genuine inner tie rods are about £40 each, but people have used others http://www.cliosport.net/forum/showthread.php?675576-possible-cheaper-inner-track-rod/page3&highlight=micks+garage to get the inner tie rod off you remove the rubber boot and you ideally need a tool like this...

i used my dads dewalt 18v drill and they came up fine and im sure thats more powerful than needed

You need a drill bit the same size as the bolts 8mm iirc Here's a picture of mine fitted

I bought the material, then a got a auto trimmers around the back of where I work to do it. Material cost me about £60 and they charged be £30 I think to cover it Yeah I've bought the springs, still yet to fit them though. Got loads to fit to it Eibach Springs Inner tie rods Track rod ends...