Eibach Pro-Kit rear springs

[chaski]

So, when I bought my 182.. the guy gave me a pair of Eibach springs and simply said "if you like a stiffer ride, these are good". Didn't think anything of them, until today.

They read: Eibach EW7524002HA on them. I did google/search ClioSport and the only info I could come up with, was from an old thread here

Though, I didn't find a definitive answer there on whether or not I had the right springs for my Clio, which is a FF BG 182. I'm also now wondering whether or not the front springs are in fact Eibach's and not standard cup at all. This would make a lot of sense... as the gap in the wheel arches on the back is bigger than at the front.

Anyone able to shed any light? If these are the right springs, then I'll get them back on the car over the standards both for aesthetics/ride. I want to be sure they're the right spring for the right car though.. can't see putting the wrong springs on being anything other than dangerous?

 

[morgam23]

​http://www.k-tecracing.com/show_product.asp?id=849&appid=2

 

[chaski]

​http://www.k-tecracing.com/show_product.asp?id=849&appid=2

Not finding any useful info on that site bud? I already have the springs.. trying to determine whether or not they're the correct springs for my 182 as an old Cliosport thread suggested there was two 'models' for different weights of car.

 

[Matt e]

on kam racing they give this part number E10-75-001-02-22 for the pro kit for the 172/182

http://www.kamracing.co.uk/car-tuning/renault/renault-clio-mk2/suspension/springs/eibach-pro-kit-springs-renault-clio-mk2-all-exc-1-2.html

​

 

[chaski]

Yeah.. basically, I'm trying to work out if the part number of EW7524002HA printed on the springs that I have in my possession belongs to the pro-kit with the number of: E10-75-001-02-22 or the pro-kit with a number of: E10-75-001-01-22! Reason being that from the thread I linked in the OP, people were saying that 02-22 is the right set of springs for a 182, with the 01-22 variant being for lighter Clio models like a 1.2 or something like that.

Found these documents after searching specifically for my model of Clio and the part number that's on the springs is listed in that document. Would it be safe to deduce that these are in fact the pro kit springs that are appropriate for the 182?. http://www.dvsegmbh.info/PDF/einbau/22013/2299/E10-75-001-02-22.PDF

 

[chaski]

Managed to get this information by using Google translate off the German document. Does this sound right?

EW 7524002 HA
Identification
progressively
Outer diameter (mm)
140
Wire diameter (mm)
10.25 to 14.75 (inconstant)
Spring length (mm)
> 185
Total number of turns
7.4