Search results

http://www.ebay.co.uk/itm/FOCAL-130A1-5-25-INCH-13CM-100-WATT-2-WAY-COMPONENT-KIT-SAME-DAY-DISPATCH-/180883600347?pt=UK_In_Car_Technology&hash=item2a1d80b3db thanks

I have a williams f7r fitted to my mark 2 phase 2. Was running it with a blocked fuel return due to being lazy and not running a return line and using a 172 pump ( which i know have) however i have thought could i used the carbon cannister line as a fuel return as it goes back to the tank? If...

Does anyone know if this system has its own ECU or requires the Engine ECU to run. As i have fitted a 2.0 williams engine and it does not currently run ( i have deleted the old engine ECU) would i need to put the old engine ECU in to get it to work, or issit a case of giving it VSS sensor...

In the process of doing my hg right now and torque them all to 30nm then was going to do 165 degress as i saw in another post. However the angle guage messed up. So in the correct order i then torqued to 1 to 10 to 50NM. I then in the correct order torque them to 80NM. Does anyone know what NM...

My 1.8 mk1 in my mark 2 is running no fuel return. Soon i will be putting my 2.0 williams in and want to run a fuel return. It used to be a mark 2 1.2 16V engine if that helps. In the drivers side there is a charcoal filter or some sort of breather for the fuel ? I dont use it anymore...

Ok Car currently has a Mark 1 F7p in. Conversion was a ballache as i didnt plan it out properly and car was off the road for a good few months. Now ive been buying bits slowly and have bought a F7R. Which will be going in once i have collected all the bits. So i can take it out on the monday...

Hello i have a mark 2 54 plate clio with a digital dash. The engine im running is a mark 1 F7R. But im currently running the 1.2 16v fuel pump. I have a 172 phase 1 fuel pump which ran dial not a digital dash. However both have 4 wires from the pump, Live, Earth and im guessing two signal...

Does anyone know if i can replace my electric steering rack in my mark 2 clio with a f7r engine. To a RENAULT CLIO MK1 1998 (R'REG) 1.2L manual rack. Are the mounts the same? as i dont want to run pas so there is no need for the heavier electric rack. Thanks olly

Are the discs and pads on a mrk1 valver the same as i have on my mrk 2 phs 2 clio 1.2 16v So if i was to buy valver discs and pads i could fit them http://www.k-tecracing.com/show_product.asp?id=2519&appid=1

mark 2 f7p 1.8 16v engine http://www.youtube.com/watch?v=nHyi_gflhCM

Anyone know what colour or what ones are the ignition wires on a 1.2 16v 04 plate. And if there the ones that comes for the relays or the white block in the engine bay. Im desperate as i need the car running for a new job on monday. If anyone could get a wiring diagram that would be...

Done the conversion but i cant get a spark. I have power through the whole loom, inc the coil but there is no spark on any ht lead or the king lead, yet when i put a voltage probe on the king lead top of the coil there is a permanant live? is that right? Has anyone got a wiring diagram for...

What would i need to fit 172/182 brakes to a 1.2 Would it make it eaiser if i also bought 2.0 coilvers as im getting coilovers either way/ e.g upgrade to 2.0 coiles and brakes at the same time

Onced my f7p engine is in from a mark 1 into a mark 2 shell i need the wiring done, wondering if anyone can give some tips for willing to do it if i pay them

Saw you the other day u was with the missus

Ok ive got everything i now apart from gearbox+ driveshafts I know know what gearboxs fit my f7r engine but i dont know whether i can use my original mrk2 1.2 shafts or will i need to buy valver ones or the ones which would be used with the orginal car the gearbox comes out of. .ie if i use...

Right ive got a 1.8 16v engine out a valver to go into my mark 2. But i need to know a few things. Will it go on my subframe? What gearbox to use baring in mind i want the speedo? Atm i have engine + all anciliaies. loom and ECU Exhaust manifold and downpipe the rest is getting fabricated...

Hi does anyone have the wiring diagrams for a 1.2 16v 04 clio and a 1.8 16v as i will need to give them to the auto electrician to do the wiring. Thanks olly;)

Right if all goes to plan im getting a williams engine + everything i need for my conversion next week off of someone on the forum. Im just wondering how hard the wiring is going to be, im not doing it myself but obiously im going to be paying my mechanic labour so thinking about how long it...

Would a 197 engine/gearbox fit into the mark 2 shell? i had a serch but couldnt find anything. Thanks Olly :cool:

I want to put the 1.8 16v engine in my car/. Ive found one for 130 inc engine, ecu, loom, gearbox + clutch, clutch alternator and driveshafts. Is there anything else i will need other then airfilter and exhaust if it doesnt come with them? The mileage is about 100000 when do these engines...

Flew past me, then let me pass u, then you was behind me untill i came off at crawley. i was in a 1.2 16v black clio lowerd on ultraleggeras with k-tec cat back

Just written off my clio, swerved for a fuking duck, which in the wet caused me to lose control, was a sharp corner and i was on standard alloys with contentials at the time. The car is a complete write off, hopefully all goes well with insurance. Just if i ran the duck over :(

Ive got a 56 plate mrk 2 1.2 16v clio which im converting to a 172. Is it all plug and play with a 172 phase 1 engine, ecu and loom?

Im looking at buying some second hand alloys. They are rare and ford fitment. Issit possible to buy adaptors for it, i think ford is 4x108 and im guessing my clio is 4x100

Some of you may have seen pics of my clio. Well im now looking to euro it. At the moment its sitting on eibach sportlines. I want to buy some euro wheels around 15". The question is what coilovers to get to make the wheels fit the arches. Thankyou

Hello, once the headlight has been removed, issit possible to take the insert out, as i want to spray mine to match the rest of my car but i dont want to take the bumper off + light out if the insert doesnt even come out ;)

obiously mine is the clio

My eibach sportlines have just arrived. Ill hopefully be fitting them tomorrow, do i have to drive easy for a few days after fitting, or can i literally fit them and test it in the twistys

My clio got keyed on the bonnet this morning whilst i was in a lesson at college. its quite deep, what can i do about it