Search results

Right i may be able to sort out a group buy on fuel swirl pots 2.5l they will have an fixings on them what i need to know is what an fixings (size) for the clio and if anybody would be intrested

While my engine is in bits i notice a key way in my crank and pully. I know they dont have a key but can you just put one in to be safe or is it more complicated than that

is this a diy job or do i pay some body to do it ,been quoted £20. also there seems to be sum oil feed pipes or somthing on the inside of the block are these in the way for honing

HI just wondering could you run hi comp pistons on megane 225 rods or even standerd rods. based on 230bhp

Hey guys getting a bit stressed now. Im after the clips that clip into the body so you can put a screw in ,the oval shape one's. i have looked all over ebay but cannot find any under clips. Don't no what else to call them

hi just wondering what can i clean the mating surface of the block with were its meets the head is scotch bright ok..

hi peep,s had my car leak tested as i was using oil and the garge said its leaking from the rings cylinder 2 and 3. so i have now took my car off the road. just wondering do i need to remove the pullys to get the rocker cover off to get to the head bolts.

done a test today as i my car is drinking oil (172) so hear goes left to right 180,150,150,175 i then did a wet test on 2 and 3, think i put to mutch oil in though as it went to 250 in eatch oh i forgot to mention when i took the spark plug out of cylinder 2 the electrode was missing :p

my mum has a 1.2 clio 16v 2004 and in the morning her boy friend starts the car and waites for her out side after a few min the idle starts to drop and struggles. the temp gauge apparently jumps up and when the idle drops it feals like its going to cut out but revs it self back up. only does...

decided to have a play with some fiberglass over the weekend to fab a custom pod for my oil pressure and temp gauges. what do you think??

right got home from work and started my car and it was misfiring so put the obd reader on it and found it was misfireing on cylinder 1 . so i swapped plugs on 1 and 2 no joy, so i swapped leads at both ends on 1 and 2 no joy. so i then decided to check 4 incase the obd reader would read it...

Ryt guys and girls i have a miss fire seems only to strat once the car has warmed up. i have changed the coilpack for a new valeo one. any ideas last plug and lead change around 1.5yrs ago with magnacore leads if i put it in 5th say at 40 and accelarate is seams worse

iv got the ones for the coil pack and cam caps now just need this one. myt have a go at spraying the rocker cover to while im at it all

i need the part numbers for coil pack cam caps

hello. I went out today and on my way home my car started spluttering and poping so i pulled over. i got out the car and got my mate to rev the car while i checked thew color of the exhaust smoke. it was black but then there was a ticking sound from the engine so i turned it off quick. thinking...

i know the length just wonder what size is. is it m14 for example clio 172 ff

My gear box has been whining for a while now and mate mate has a Williams gearbox that has had a recent recon for sale. i have a ph 2 172 ff will a Williams box fit and is it a straight swop thank you.

my battery has died but i have an old 1 knocking around but its only 425a starting power will it start?

is it a good deal a friend can get them me for 320 a set on 195/50/16 will these fit as standers are 45s

What do i do with this when removing air con thanks

just been and gave the part number 7701499959 he showed me a picture of the alternator and it has 3 conections,the clip the bolted wire and a spade conection is this the ryt one. what is the spade conection for, he gave me another number av11 i think it started

Just been searching i read burp says this is ok from what i see on hear he nows his stuff so will it be ok

Hey i have just removed the air con from my car. i got the brackets from a lauguna and a valeo recon alternator off ebay. i havnt drove the car till today and when i hits 2k revs i get lights on the dash, abs, traction, stop, service,ect so i got it home was only around the corner. The...

Hey im just finding it a pain to get the pipes to run in a decent place and the sensor on the pipe is fouling the fan. just wondering if theres a nak to it. Oh and ive removed my old alternator today to find it was held on with 1 bolt wtf lol.

Hi all i have just fitted my omp wheel and boss kit. my car is currently in my garage off the road. ive just tested it down the street and my traction control light keeps coming on . it goes out if i restart the car but if i put lock on the wheel parked up the ligh comes on again or if i drive...

yesterday while having my bumper off to repair my head light and fit my washer blankers i thought just do it. so i did i removed it and blocked both hoses up to the inlet and from the tank ive left the top part pluged in as ive read to do this. i got out of my car before and thought i had a...

to keep it simple ill uses a 1*2 as an example. when fitting a turbo i get how it all work and that but what is the pipe for that runs off the actuator. ive seen turbos were the pipe goes back in to the turbo housing and others with no pipe like the ktec 1. so on the ktec one would you run a...

http://cgi.ebay.co.uk/RENAULT-CLIO-SPORT-172-182-EXHAUST-MANIFOLD-2-5-/110616614324?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item19c14395b4