Search results

Recently did my sills from your advice on another thread, its very difficult to fully rust free the layers of pressed metal. Zinc Primer should only go on bare metal really, BH state the same. Dynax UB will take paint, or am I reading that wrong?

Its normal for the light to flash like that with no key in. Are you sure the battery isnt shot, Are you able to test it with a multi meter? You have the exact same symptons i did and it was the battery. Does the time on the clock reset?

So mine opens and closes, however it goes to recirc 'open' when you turn off the climate and you get a cold breeze. Having looks through the threads - I tried to manually move it but it just resets afer having the climate on / off. Could someone confirm the position of the flag when climate is...

Enjoyed reading though this thread, lots to be said for fixing and re-using things, those calipers came up ace. Happy Days on the MOT, nice feeling isnt it. Suprised on your receipt for your ac its shows they pulled gas out? Just replaced my condensor and finished leak testing, so fingers...

Thanks, went back and took another look. Slots in here perfectly. Looks to hold the screen connector. Photo for anyone else finding them in this situation. Otherwise very easy to take apart if you are careful with the clips

Done all mine now, thanks for the help with this (y). Looks and feels much better. I took the AC panel apart and this little metal piece dropped out but not clear from above photo or from the unit where it goes, any ideas please?

If anyone needs replacement bolts and doesn't fancy paying Renault £9+ per bolt I found these to be a solid replacement. https://www.ebay.co.uk/itm/335045940167

Went back and checked and there is a small amount of thread in the carrier, not sure how. I've got a pair of calipers with carriers so all now sorted. Seems like parts are getting harder and harder to find but i'll get her back on the road. Appreciate the help

A 182

Unfortunately the carrier thread has stripped and i'm struggling to find a replacement. Order a second hand caliper with carrier which also came with stripped threads. I believe the Renault part number is 7701047929. I can't find any OEM. This part states its for both sides, but I didn't think...

Mine ended up being due to a faulty ABS sensor on the front off side. Diagnosed by getting a local Renault specialist to put it on the Clip

I had tried this but clearly I was being too gentle still. Gave it a right good slam and its locked solid - saved me a possible MOT failure to so thanks!

Having folded down the bigger of two bench pieces the other day - I went to tidy it all back up. Only problem being it now won't lock in place. Anyone had this issue provide any ideas?

So the 182s front splitter is knackered. Now I know you can get the Skoda one but whilst looking on eBay for one, came across this http://www.ebay.co.uk/itm/322366969091 Wondered if anyone had any experience, with it being foam figured it might deal with bumps n scratches easier.

Thanks for your help resolving this. Was off side sensor. Got one off eBay but man it was a bugger to remove. Watch out for anyone else would be the sensor doesn't come with a replacement nut. Which isn't ideal!

I did give that side a good clean. Might have another look. It's been on constantly for about 2 weeks, comes on with the ignition. I hope not too mate. Think I will replace brake sensor and recheck all the abs rings / sensors then get it plugged in fif that hasn't sorted it. Cheers

The exact same happened to me. I've tried the brake sensor reset and different adjustments but no luck. Also OBD not throwing up anything. Did have a cv boot strap missing but abs ring looks ok

Will do. Is it a bumper off job to fit, Anything I need to be careful of with them being high voltage?

Ordered. FYI for anyone buying off that site, 5% off if you enter SOCIAL5 in the voucher box :smile:

£11.97 for a set delivered its worth a try. They have really come down in price since I last looked! 5000k will pass MOT I presume? Might do this when I polish off the marring. Cheers

The beam on mine doesn't seem to shine as far as I remember. Buying these likely to improve the distance of the beam?

Hi, Does anyone have any experience of these? http://www.ebay.co.uk/itm/DIRENZA-RENAULT-CLIO-182-MK2-2-0-16V-SPORT-STAINLESS-STEEL-CATBACK-RACE-EXHAUST-/181468973174?pt=UK_CarsParts_Vehicles_CarParts_SM&fits=Model%3AClio%7CCars+Type%3A2.0+16V+Sport&hash=item2a4064c876

Is this the selling price these days? Though this one doesn't have FSH. God know's how much my 182 would be worth then :s...

Ouch, that look nasty. Glad your ok though!

This has not long happened near I live, hopefully no one one here, looks like its hit a police car so hoping it's not sometimes pride and you Been nicked. Either way hope occupant's are the OK.

Imagine its easy to change, How much did the parts cost?

Hmmm its not these, the fitting is different depending on if you have the map light I think. Festoon fits in the boot though.

Main interior light and map reading light. Reading a few threads thought a 12 SMD might not fit?

I bought a set of these: http://www.ebay.co.uk/itm/250948414866?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649 but they are not really very bright at all, plus they stay on very slightly when the current is active. Anyone recommend any decent bright ones. Don't want to play the guessing...

Something like this.. CLIFFORD G5 + http://caraudiosecurity.com/shop/product/products_id/5093.html