Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Bumping for more feedback, as I am also in the same position, did less then 200kms last year! really dont feel like changing these just for the lols! I was told the plastic pulleys are what fails on the timing side, is this true? Any one seen this?
Bump I have the same issue since fitting the PMS shifter, Any help guys? Mine jumps out of 2nd but only on the most lethal late braking / weight transfer around one corner at my local track, impossible to replicate on the street!
Bump, can I get an update on this as its driving me nuts! I spray Lithium grease in there and it goes away but then comes back, really want to at least peek in there and see whats what!
Hey Guys
My Car is a 182 cup. Latest issue ive had i can sometimes here what sounds like the column / pinion is rubbing i sprayed some lithium grease into the steering column and it has in the past gone away but it comes back, is there a way to remove the rubber cover down there in the foot...
soo just fitted mine, took it for a spin and it rattled like a chain saw, came home fitted the dampener to where the kink is and it pretty much disappeared but can still hear it at around 6-7k, is it worth moving the dampener ?
Hey guys
just did a awesome track day here in oz and after the last session came in with the clio pissing out power steering fluid from what looked to be the actual pulley, as was hours from home and quoted $880 for a tow I just drove it home topping it up very 30 mins or so, did notice heaps...
Solved! one of the rose joints was stuffed was super tight hence why after driving it would get hot and expand and make strange creeking noises, when cold it was almost unnoticable
Hey guys
got some funny noises coming from the front end. car feels great and handles great it just had fitted the bridge craft roll correction kit, has BC's and BC top mounts, but i can here some faint grrrr noises coming from the front when at super low speeds even slightly turning left or...
Hey Guys
Got 100 cell and miltek cat back fitted, i believe the exhaust shop didnt touch the pre cat sensor but next day after exahust fitted at a track day the engine light came on yellow and wont go away even after reseting error codes with RS tuner. logs with the tuner show the voltage...
they only have maybe 1000km on them, I installed them couple of months ago and had no problem, I had to remove the coilovers to have them modified to fit the roll correction kit on and figured easy just to remove the the coilover and top mount together. I did have a bit trouble when I put them...
Yep that’s how I set mine up too I think previously with out the top mounts we could only get 2.7 degrees camber with only the bolts but I believe extra castor would be more beneficial but like to know how much should we being aiming for?
Sent from my iPhone using Tapatalk
Hey I’m buy no means an expert and rely on quality wheel alignment techs to get it done right, last setup was 3.3 degrees camber, 3 degrees caster, 0 toe, seem’d great at last track day but had a bridgecraft roll correction kit as well for the 1st time which transformed the car, should the top...
Will have a play tonight, can anyone confirm that pure motorsport top mounts will fit the BC's? As they bolt through the strut towers I feel they might be a bit better.
Can any one also confirm the 3 bolts on the BC Motorsport Top mounts dont adjust anything and are clearly there to clamp the...
Hey Guys
I have BC top mounts fitted to my BC coilovers, fitted them and everything was fine, had to remove them and since fitting them again I can hear what feels / sounds like the top mounts are loose when say moving around a bumpy car park, driving at speeds is fine, ive loosened off the...
Hey Guys
I have a bridge craft roll correction kit for my 182 just wondering if anyone can confirm the torque settings. Is this correct:
117nm for the ball joint and 82nm for the tie rod end?
thanks
David
Hey Guys
This has happened for a while now intermittently but now quite often and looks to happen when ive been sitting at a red light with my foot on the brake peddle once released and I take off the abs lights come on until i turn the car off and on. I changed the left front ABS sensor and...
how am I supposed to lube my shaft? it has a tight rubber seal on it does it come off easy? Should I pry it open with a screw driver as couldnt by hand, Then whats next to i need a grease gun with a pin attachment? and what grease can should I use, I have some CV grease will that do the job?
Hey Guys
Ozclio from Australia here with another issue I need to identify what the hell is wrong. Please have a listen to the video below.
I think its a inner tie rod but could be way off. Issue started over night and I havent driven it since as you can see its not constantly like this but...
Slam panel and top grill was well off, half day may be exaggerated but defiantly not a walk in the park coming from my regular office job to master mechanic
Sent from my iPhone using Tapatalk
Just an update new aux kit is all on and no more rubbing has loads of room between belt and pulley. Cost about $300aud from Renault Australia with trade pricing. Took me half the day and lots of head scratching and did it with bumper on and the jubilee clip trick as of course the tensioner tool...