ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Search results

  1. M

    Nova 1.3 SR

    Hi peeps, I havent been on for a while, but couldnt leave this one without a reply. Im glad to see some pretty sensible discussion here in the whole. Ive had many cars in my time, and by far my favourite was a 1.4 SR Nova. I tuned it very heavily for very little money, and soon realised...
  2. M

    2002 1.2 16v MPG Readings

    I used to regularly average 40-45 in mine, but could reduce that drastically if I was really going for it cross country. The V6 4-mtn averages about 26-30mpg, but drops below 7mpg when you really hammer it (real time).
  3. M

    Huge backfire

    The key thing is you said that it started bogging down, and revs dropping. When running nitrous, the lower the rpm, the more nitrous goes in per cycle increasing torque and compression. Combine this with an engine under load (enduced by rollers) and the pressure would be far too great...
  4. M

    DIY Nitrous

    So what size fuel jet did you use then? Have you been on the rollers to find out how well the kit is working on your car? How lean/rich are you running? MC
  5. M

    DIY Nitrous

    Clio King, So youve built your own kit too, how did you get on, were there any snags? How did you get on with running it up and testing? Id be interested to have a chat. Weve found loadsa ways to save even more money. What psi did your fuel supply run at? MC
  6. M

    DIY Nitrous

    Simon, Yep, I agree, and every kit will have to be made individually suited to that car. The benefit I have with the 1.2 16v Clio is the size of the air plenum. There is so much volume I can run a nozzle in without disturbing flow. With most other injected cars, a nozzle can sit in the...
  7. M

    DIY Nitrous

    We really havent given a lot of thought to how much well charge for a kit. probably between £250 and £300. The kits can be fitted for you, not sure on labour yet, or youd be able to fit them yourself with instructions, but we would have to set them up. As we cant test on every car due to...
  8. M

    DIY Nitrous

    Yep, weve thought long and hard about the nozzle. The nitrous is going to be injected into/along a shortish piece of copper pipe about 10mm in diameter. slightly further along the fuel will be sprayed in a fan shape into the flow of nitrous so that it will atomise. Hopefully this should work...
  9. M

    induction kit or replacement filter

    I see your argument. I have spent many an hour playing with choke sizes and trumpet length to get the best compromise between torque and bhp on Novas. This is why when I think about altering a component, I really do just that, think about it. The first thing I did is try running without any...
  10. M

    induction kit or replacement filter

    Captain, The diameter of that intake pipe must seriously only be about 1", almost half that of the throttle. There is a large boxy plenum before you reach the throttle. Once removing the standard filter, I can fit my hand and arm into this plenum and touch the throttle. This design is...
  11. M

    DIY Nitrous

    Thought I’d update you all on my N2O project. Several weeks ago, I was quite bored and whilst day-dreaming, decided to fit Nitrous to the Clio. The only problem was that I couldn’t afford it, so I started thinking about how to save money. I’ve fitted a HighPower kit before, so I know what the...
  12. M

    induction kit or replacement filter

    Get the Cone filter. All trust me when I say it works on this engine. Its very different to all other Clio engines. Ive stripped the entire inlet system down from inner wing to the head, so I know it well. The standard airbox and 1" diameter inlet tract are the most restrictive part of the...
  13. M

    type r or 172

    I have to agree with the previous comment about the Leon Cupra R! The wife and I test drove one last week, and although slightly slower than the competition, you get so much refinement and comfort. The build quality is fantastic, just as good as the Golf it is based on. It has 210bhp, 199...
  14. M

    type r or 172

    I have to agree with the previous comment about the Leon Cupra R! The wife and I test drove one last week, and although slightly slower than the competition, you get so much refinement and comfort. The build quality is fantastic, just as good as the Golf it is based on. It has 210bhp, 199...
  15. M

    NOS (again)

    Its about 1.5 Euros to the pound.
  16. M

    Over-revving on 172 on gearchange

    This is the first car Ive owned with FBW, and its a pile of poo. The Throttle response is so slow! Ive compensated for delays in response without thinking about it, just hit the throttle a fraction earlier, but because the motor driven throttle takes a fraction longer to close, you do get the...
  17. M

    Over-revving on 172 on gearchange

    This is the first car Ive owned with FBW, and its a pile of poo. The Throttle response is so slow! Ive compensated for delays in response without thinking about it, just hit the throttle a fraction earlier, but because the motor driven throttle takes a fraction longer to close, you do get the...
  18. M

    2001 manual sunroofs

    My Sunroof handle was a problem. It was more of a creaking noise than a rattle. This was caused by plastic rubbing against plastic. I sprayed WD40 on every moving part and hinge, and no more rattle/creaking! My seats havent gone around the headrest yet, although I can see the potential. MC
  19. M

    2001 manual sunroofs

    My Sunroof handle was a problem. It was more of a creaking noise than a rattle. This was caused by plastic rubbing against plastic. I sprayed WD40 on every moving part and hinge, and no more rattle/creaking! My seats havent gone around the headrest yet, although I can see the potential. MC
  20. M

    How much will a turbo cost me

    Sent it to your hot-mail acc.
  21. M

    How much will a turbo cost me

    Ben, You have mail. Excuse the poor artwork, Im in a laboratory and Im supposed to be working! MC
  22. M

    How much will a turbo cost me

    Sent it to your hot-mail acc.
  23. M

    How much will a turbo cost me

    Ben, You have mail. Excuse the poor artwork, Im in a laboratory and Im supposed to be working! MC
  24. M

    How much will a turbo cost me

    I agree to do it b4. The problem is though, that there is no tubing/ducting to the TB. It sits on a horizontal panel in a large box that has an opening of about 6x3" that the piperx adapter plate bolts to.
  25. M

    How much will a turbo cost me

    I agree to do it b4. The problem is though, that there is no tubing/ducting to the TB. It sits on a horizontal panel in a large box that has an opening of about 6x3" that the piperx adapter plate bolts to.
  26. M

    How much will a turbo cost me

    I thought about injecting to each port, but Id have to drill holes and run too much piping. I not only want it to be stealth, but need it to leave no trace when removed for servicing etc. That would have been the best option though. The guy Im building this with (also the owner of the Nova I...
  27. M

    How much will a turbo cost me

    Im still not sure. The one you mailed me about is very good, although it will add about another 50% to the cost of the kit Im building. We have some very fine bore copper tubing that we could do similar with. Split the charge two ways and angle them back at each other whilst injecting the...
  28. M

    How much will a turbo cost me

    I thought about injecting to each port, but Id have to drill holes and run too much piping. I not only want it to be stealth, but need it to leave no trace when removed for servicing etc. That would have been the best option though. The guy Im building this with (also the owner of the Nova I...
  29. M

    How much will a turbo cost me

    Thankyou for your concern. Yes I was lucky enough to keep my job, and our department faired quite well, but alas a good friend has been let go. Cheers MC
  30. M

    How much will a turbo cost me

    Im still not sure. The one you mailed me about is very good, although it will add about another 50% to the cost of the kit Im building. We have some very fine bore copper tubing that we could do similar with. Split the charge two ways and angle them back at each other whilst injecting the...
Top