Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
I've got a set of track tyres sitting in the garage but they are 50 profile and not 45. Has anyone run these on a 172 with coilovers fitted and what were your experiences.
Nathan
Having problems with a 03 dci Clio. When indicating right the left indicator flashes. The fault occurs 9 times out of ten an after trying a good stalk I suspect the uch is at fault. All I need now is a wiring diagram to check the feeds an earths at the relay an stalk to find the cause. Any help...
my screen was cracked a few months ago and then a week after that the touch pad stopped working. i bought one repair kit of a guy on ebay and stripped down the old screen and fitted the new parts. on connecting the screen to the mother board i found the cheap chinease kit would not fit the...
nice looking cup mate just seen these on ebay thought they might be of interest (no relation to seller)
http://cgi.ebay.co.uk/Renault-Clio-2005-MK2-Sport-182-172-Fog-light-surrounds-/290525651143?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item43a4ada0c7
nathan
this was a full production car made when GM owned a stake in subaru and fully owned saab. It was only available in the wagon form and lhd, but they have got a big following in the US with loads of mods available as the under pinnings are exactly the same as the wrx scooby.
nathan
have stripped my 2000 172 box and need to replace the 1st and 2nd synchros. after speaking to renault today they have told me the individual synchros are no longer available but there is a complete synchro kit available for £240 :-(. can anyone recomend a supplier where i can get new ones from...
well after a few years out of the renault scene im back again. some of you may remember me from the early days of cs when i had my cup. back then my focus was mainly on having a well sorted b road car and not a track toy although it did do 2 track days.
in 2007 i sold the clio and bought...
rear bumper - pull the rear plastic trim up on the top of of rear bumper undo the six 8mm bolts. then undo the four 10mm bolts in the wheel arch ( 2 each side) and then from underneath remove the two trim clips at the very ends of the bumper, and lastly there is another six 8mm bolts under the...
does any one know how the ignition barrel comes out of the steering column and does the spring which flicks the key back after the engine is started come out with the barrel?
thanks
nathan
im after a drive shaft nut for a mk1 172 im picking up at the weekend. ive got tones of drive shaft nuts in my tool box but am not 100% sure what one fits the 172. am i correct in saying its a 30mm nut, and if so what is the thread size.
thanks
nathan
http://search.ebay.co.uk/search/search.dll?sofocus=bs&sbrftog=1&from=R10&satitle=porter+cable+polisher&sacat=-1%26catref%3DC6&sargn=-1%26saslc%3D3&sadis=200&fpos=cm20+3qb&ga10244=10425&ftrt=1&ftrv=1&saprclo=&saprchi=&fsop=1&fsoo=1
from all of these which would you say was the best to get. i...