Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Hi
I've just bought some staggered Borbet A alloys for my Clio MK3
7.5J ET20 on the fronts
9J ET15 on the rears
i made a mistake when checking fitment on willtheyfit.com but I had already bought them so I'm a little stuck. The correct information comes up with info indicating that they will...
Hi,
I have an MK3 extreme 1.2 which is riding on FK lowering springs at the moment. I want to get coilovers however i'm unsure of which ones to get. Would MK2 coilovers work for this application is that just outrageous. Also, I dont want to spend an arm and a leg for this, so relatively cheap...
I reckon just under 100ml came out. I bought some oil anyways and i'm gonna top it up. Do you think everything is back to normal, in terms of security. I dont want anything falling off whilst I drive haha.
Hi,
This saturday I installed some lowering springs on my Clio MK3 Exteme 1.2 Petrol. I removed the drivers side strut and let the hub assembly rest and all was good however, when I did it to the passenger side, oil began to trickle out of the gearbox. I pushed the hub back into place and the...
Hi,
I am planning to upgrade the coils springs on my MK3. Apparently, the retainer nut on the top hat of the strut is inside a recess with a hex nut in the middle to prevent the assembly from spinning when loosening/tightening the retainer nut thus meaning that I will have to use an offset ring...
I have a HID conversion kit already fitted. I have ordered the RS Grille but how would i fit it? I've seen lots of posts saying that I would maybe have to take the entire bumper off, is this true?
http://imgur.com/ZQfR0hl
Hi,
I've been on ClioSport for a while now but I have never posted anything because I've never needed to. It seems like I need to now. I have recently ordered a set of FK Automotive Lowering Springs 40mm for my vehicle. I was just wondering if anybody has any tips for how to tackle this job...