Search results

Hi everyone just looking for some advise, My run around Mk2 1.4 16V Alize clio lost power on the motorway a few days ago which caused me to get the AA out to fix what I though was a coil pack issue. The AA guy found that cylinder no.1 had a misfire so he changed the coil pack which did not...

Hello all, I'm trying to help a college get a Formula Renault up and running for this season but they are having a few issues with the engine. They reccently purchased a Renault Megane engine along with the ECU and loom. They were told it was running fine on removal. They have installed...

I need a favour if possible, Does anyone have either a 172/182 F4R engine or the williams F7R engine that is currently spare or out of the car in the Peterborough or Cambridgeshire area? I'm trying to help a college get a Formula Renault car up and running for next year and they need to...

Bit of a random one this but im trying to help a college get a 1991 Formula Renault up and running for next season. The guy who is leading the project is looking to a fit a 2.0ltr engine to it before the end of this year. Currently there is a 1.7ltr engine, which im guessing was originally...

Just ordered some from K-Tec and have just fitted them. I noticed they dont come with the anit-rattle shims. Will these still be ok without them? obviously they move around alot and will make alot of noise but just wanted to check. Adi

Im going to have a go at a big detail on my williams next week before heading off to le mans and would like some advice. I have reccently bought a PC and have had a little practice with it already. I currently have the Poorboys SSR range for removing swirls and they seem to work pretty well...

Ok so my williams has been off the road for about 4 months now and its finally off to hillpower tomorrow to get sorted, even thought im not sure what needs sorting. After pulling away from a junction rather quickly i heard a large clunk from the engine bay. Since then when pulling away from...

I think my drivers side inner cv joint needs replacing. Is this an easy job to do and what tools and parts would i need? Would it be easier to replace the driveshaft as i was going to do both sides eventually anyway? This is for a williams Adi

Just drove my car home from work and when pulling off in any gear the car judders violently making the gear stick move and causing a banging noise. My engine mounts have been worn for awhile as i have always had quite a lot of geat stick moving when applying and coming off the accelerator. It...

Finally got to test out my new products on some decent paintwork, my mates 54 plate corsa. Was quite impressed with the results as it was all done by hand. The procedure was as follows. Wash the car with Zmol Autowash Clay with soapy water Scratch X where needed Polish with SRP...

After getting all my suspension fitted and problems sorted ready for le mans this year my williams broke down tonight on the way home. Was driving on the motorway accelerating upto about 70mph when the revs suddenly dropped. They then went back up again and dropped until i started to slow...

Im off to le mans on wednesday and after fitting my coilovers thought it best to get the alignment sorted out as it was pulling to one side. Get down to the garage for them to tell me they couldnt do it as my track rod arms were seized. Is this an easy job to fix myself as i really only have...

Im unsure how tight to do up the top mounts, anyone know? Drove it home from work today and well impressed with the handling and ride, so much better than the GAZ coilovers i had on my old RT. One thing i did notice though was that the tracking was quite far out and also seemed to change...

Ok im a little confused and just wanted to check i was assembling my coilovers correctly so i can have a go at fitting them tomorrow. There H&R coilovers and are going on to my williams. I bought a new top mount kit from renault and have just had a go at putting them together. So is this...

I currently have a set of H&R coilovers and Bilstein rear dampers to fit on to my williams. Last week i managed to lower the rear of my car but have yet to fit the dampers. The rear dampers are the shortened versions and i noticed that there is a lose metal washer of some sort that slides up...

Ok i have tried quite a few car cleaning products mainly the meguiars range which i found to be quite good. After reading a few of the threads on here i decided to buy some auto glym SRP and EGP to see how that goes. What do people recommend for the following. 1. Washing, what wash and cloth...

Picked up my H&R coilovers today for the williams. Was expecting to get the two front coilover struts and two uprated rear dampers, but found out I only have the two front coilover struts. Is this correct do H&R not provide rear uprated dampers? If they dont were can I buy some uprated rear...

Any one know the best place to buy these from for a williams?

My MOT is due soon and i have a decat pipe on my 94 williams clio. Im guessing it wont pass the emissions test, can anyone confirm this? I have the cat still so i can put it back on, just a pain as most of the bolts have rusted badly.

I could smell petrol when i was stopped at a junction on my way home from work tonight. Thought nothing more of it until i stopped for the second time. Eventually made it home to find that one of my fuel lines maybe even two have been split by the alternator belt. These im guessing are the fuel...

Anyone know of a good body shop around the oxfordshire area? Need to get the rear arches sorted and possibly a full respray

Saw you going round the roundabout and on to the dual carriage way blue with black wheels. Plate ended in YOJ i think and had a cliosport sticker in the rear window anyone??

Spotted u outside tescos in bicester. Cliosport sticker in the rear window and number plate ending in WOY if i remember correctly.

Spotted a green coloured mk2 parked outside soccer express with cliosport sticker in rear window? Reg K*** RYM On the way out off the carpark spotted two 16Vs heading off down cowley road Anyone??

Drove past in the centre of oxford at about 8:00pm tonight anyone on here??

Anyone on here, was following behind me and passed me before turning off!! I was in the williams. Adi

My mate was thinking about a 10" sub/amp combo and we came up with a Alpine Type R DVC sub (10") with a kenwood 8151D mono amp.... anyone got any views on this or either of the components? ....

Anyone know where i can get a good price for powerflex bushes for an RT clio? Im going to try ringing demon tweeks tomorrow. Anyone know the approximate prcie??

Rang up K-tec today and asked what coilovers they did for the RT. The only ones they said they did was the ultimate coilovers http://www.k-tecracing.com/show_product.asp?id=1049http://www.k-tecracing.com/show_product.asp?id=1049 Anyone got these fitted to their car? are they any good? What...

Anyone know if the brake drums on a 1993 1.4 RT clio are bendix or girling or was it random?