ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

bolts

  1. Raceface_13

    Stud conversion=Death?

    Hey guys, Seen a lot of posts (especially recently) about wheel stud conversions failing and loosing a wheel on track, even after being torques up after each session etc. Are some people unlucky or doing something wrong or are they still a safe thing to do? want to do mine for spacers and ease...
  2. Joe Wootten

    Fixing side mounts

    Hi all, I'm fitting some sidemounted fixed back seats into my car, looking for advice as I can't seem to find any info on what size or type of fixing to mount the side teams to the subframe that then bolts to the floor. Can I just bolt the two together with a high tensile bolt a lock nut and a...
  3. K

    Coil Pack Bolts

    Having difficulty getting a socket on the coil pack bolts, manged to get 3 off but the top left is having none of it, it's just far too cramped to get any socket on it. Has anyone had similar and got a solution? Also does anyone know what size the inlet manifold bolts are, I had one snap.
  4. cup182RB

    Wishbone bolts / ARB bolts / Earth Strap - 182 Cup

    Evening all Does anyone know where I can lookup the Renault Part numbers for these items so that I can have a scout around on the internet for the best prices? I am going to fit some poly bushes and can't see the 11 year old ones surviving the process. As for the earth strap it is completely...
  5. Joe Wootten

    Downpipe flange bolts

    Hi guys, In need of desperate help again, after having to replace my exhaust downpipe flange bolts (the sprung ones connecting to the cat) with some regular bolts as a temporary fix while trying to find some replacement ones, one bolt has now shaken loose :(. Does anyone know where I can get a...
  6. JamesBryan

    Wheel/Tyre Suspension Clearance

    Just fitted my camber bolts and had them dialed in to -1.5 deg. I'm now thinking the inside edge of the tyre might be too close to the suspension spring, especially on track under hard cornering. I can just get my fingers in the gap between the two, so say roughly 10mm +/-. Is that enough...
Top