1.2 16v spark plug problem

[BuCkLeY...]

Hi :smile:​

Was going to change the plugs on my 1.2 an found there is a plastic cap from the Ht leads on them. Anyone got a idea how to remove them I tried coat hanger which had a hook on the end. But didn't work 😧

It's the engine with long and narrow plugs which need a special socket

 

[..Jack..]

Hi :smile:​

Was going to change the plugs on my 1.2 an found there is a plastic cap from the Ht leads on them. Anyone got a idea how to remove them I tried coat hanger which had a hook on the end. But didn't work 😧

It's the engine with long and narrow plugs which need a special socket

Is it the rubber boot? If so I can normally put my socket on over it and undo it then remove once out

 

[BuCkLeY...]

I tried and got socket stuck for about 30 mins :/

 

[MicKPM]

You are using the correct14mm Dia tool?

 

[BuCkLeY...]

You are using the correct14mm Dia tool?

is that like a extension bar with a splines end and a ratchet end? If so I have one on loan from work But It won't fit due to the black caps being in the way:/