172 Airbag light help

[e36m]

Advise needed!

I've put my 172 back to standard, removed bucket seats and omp wheel. Removed resistors and plugged everything back in

Looking at paperwork the car had a coding change using CLIP by Rentech when the seats were fitted.

I now have a airbag light, and code 187 trigger line configuration, also have a seat position sensor code but this could be the sensor

Does anyone know if these codes relate to the coding changes?

Can I download CLIP and switch it back to standard?

 

[RichValver]

Advise needed!

I've put my 172 back to standard, removed bucket seats and omp wheel. Removed resistors and plugged everything back in

Looking at paperwork the car had a coding change using CLIP by Rentech when the seats were fitted.

I now have a airbag light, and code 187 trigger line configuration, also have a seat position sensor code but this could be the sensor

Does anyone know if these codes relate to the coding changes?

Can I download CLIP and switch it back to standard?

I think from what has happened when I have tried turning lights off for people in the past, if somethings plugged in but been switched off with clip it will throw up a fault. Iv used an RS Tuner and you can switch off each individual sensor so maybe worth having them all switched back on and see what it says

 

[e36m]

what's the best way to obtain rs tuner?

 

[e36m]

Would like to do this myself as the car doesn't have an mot ATM

 

[hopgop1]

You can buy one from fastchip, but quite expensive if you only need it once. Is a good code reader though.
Where are you local to? Might be someone on here with CLiP or RS Tuner nearby who's willing to help out.

 

[e36m]

St Ives, Cambridge if anyone can help

 

[hopgop1]

I’ve got an RS tuner with airbag module, but I’m probably over an hour away near Grantham. You must be quite closer to Alex at AW motorworks, im sure he’ll have a CLiP and could help.