Air bag light problem - Phase 1 172

[Fantom]

Bonjour

I have just replaced my seats and having trouble with the airbag lights. The previous owner had cut some of the connectors off and joined up the wires directly so I'm guess there was an issue with it before.
I've put the resistors where I think they're supposed to go but I had a phase 2 before and this is different.
You will see in the pics I have one single connector each side that I have no idea what to do with. What's supposed to go in here? The plug is still on each seat but I don't remember having them before.

Please see the below pictures and let me know what I need to do
Thanks for your help
Steve

 

[Fantom]

Nobody done this with a phase 1?
I checked the guides and they are for phase 2 with different plugs

 

[Fantom]

Still need this problem to be sorted

 

[Michaelfoz]

the brown plud needs a resistor in it as that is for your pretensioner
as for the black plug i'd need to check but i cant remember it being in my car lol

 

[Fantom]

You can see my resistor in the first pic. I don't have a brown plug

Most of the plugs had been cut off and the connections soldered.