Air Bag / Pretensioner Fault CB0F

[sven_8t4]

Hi all one for the techs

Clipped the latest rebuild and its brought up the usual suspects

Halfrauds connectors and tape......nasty!!!

DF183 circuit open..... Pretenisoner fired
DF253 Circuit Open..... new one on me although odd coloured rear seat belts....
DF077 memorised ..... some tit had cut through the wires at the block (now repaired)
DF065 CO........ above tit has also cut through the seat postition microswitch
DF002 memorised ......Flat battery at some point
DF060 ........ Someones unplugged the ECU with the ignition on (naughty)
DF194 1.Def ....... As it says..... needs reprogramming


Didnt think such a base low spec model wold have pyrotechnic rear belts?

 

[Ianboom]

DF253 is odd, DF056-what exactly does this do? My lad's is stuck in the reclined position (400 ohms?).

 

[MicKPM]

So whats the question Sven?

It needs the crash data removing from the existing SRS ecu or it needs the ecu replacing. Then you need to replace the spent components and reconfigure the ecu to suit the hardware.

Mick

 

[sven_8t4]

So whats the question Sven?

It needs the crash data removing from the existing SRS ecu or it needs the ecu replacing. Then you need to replace the spent components and reconfigure the ecu to suit the hardware.

Mick

Hey Mick

Just curious on the rear interia belt code as I didnt think base models had pyrotechic rear belts?

Need to take the panel off and have a look but its raining and im a wuss...

 

[MicKPM]

It depends on the year/spec of the vehicle though and towards the end of the X65 they fitted what was in stock.

Have you looked at the actual rear reels yet to see if they are infact charged reels? It coukd be that someone has tried to fix the issue by installing an SRS ECU from a different vehicle and the config is just wrong. (Do the vin numbers match the vehicle?)

Mick

 

[sven_8t4]

2002 utter bog standard authentique

I've not seen the reels yet but the odd colour rear belt would suggest someone has swapped it. The ecu appers original and the VIN does match. I'll Swapp the odd belt for a matching one and then reconfig it when I've had th crash data wiped. The last person i used to wipe my last batch of ECU's screwed me around which was why I was asking if anyone on here reset them.

Sven

 

[MicKPM]

For the price of them in scrap yards now i don't bother anymore (we pay £7-10 for them gaurenteed no deployment). Just lock it then re-write the vin in one piece of software then fit it, back to CLIP to reconfigure it when its fitted and free the triggers.

Mick

 

[MicKPM]

Standard reels are about £40 from Renault to