Airbag wiring

[-Dan-]

Heys guys new here, got myself a 172 cup the other track ready so has buckets and harnesses fitted and the original stuff removed, thus giving me the service and airbag light

plugged my code reader in today to see if i can clear them myself, its coming up with the following codes and under the seats and found alot of wires laying there with an attempt to clear the lights

could anybody point me in the right direction to which 1s i need to join and solder the resistors onto properly, most people would live with it but its going to annoy the hell out of me if theres anything not correctly done

and under the drivers seat ive got all this!

And under the passenger seat just got this

5 cut wires

Any help regarding this would be my appreciated

​Thanks Dan

 

[172john]

I used this guide for my non cup phase two and it was fantastic.
I used maplin 3.3ohm resistors, don't use crap ones.

http://www.cliosport.net/forum/show...pretensioners-notes-FAQ-how-to-remove-airbags

 

[-Dan-]

Thanks for that bud, I'm normally good with electrics but when it comes to airbags I don't like fiddling, when they say the connectors I don't have any connectors just ends of wires, what's the best way to identify which wires are what ?

 

[-Dan-]

Help please guys im on the edge of breaking down here, still trying to sort the damn light out, been to maplins to buy 3.3ohm resistors so i know there the right type and replaced what was already there, ive tried clearing them on the fault reader and have lost all the faults execpt the seat position sensor but seem to have gained a code :/

could someone please confirm i have wired everything in correctly?

Orange and brown drivers side

Brown with dark stripe and light blue with dark stripe Drivers side

Orange with stripe and brown drivers side

Onto the passenger

Orange with stipe and brown

Brown and yellow

I think ive joined them up correctly on the passenger side, put the wire the same gauge together?