Clio 182 door removal help

[.J.a.m.e.s.]

I'm currently in the process of breaking my 182.
How easy is it to remove the whole door from the car?
Has anyone done this before? Any tips or tools I need?
Thanks

 

[smac4494]

T50? Torx piece, Hammer and pin punch. A jack and something to lean it on once it's off. Torx bolt first. Then wires. Then the pin hinges. Get the window rolled down so you can hold it easier.

 

[.J.a.m.e.s.]

Oh not just a few simple bolts then :/

T50 ?
Torx piece?
Pinch punch?

 

[Budgie]

If you're breaking a car, and this is stumping you then you shouldn't be breaking a car.

 

[.J.a.m.e.s.]

If you're breaking a car, and this is stumping you then you shouldn't be breaking a car.

Iv taken pretty much everything else off..?
Done disks pads, suspension, full clio replica in the past, seats, Remap, decat and yozza change, replaced electric window motor..
Just wanted a bit of advice on the pin thing really

 

[smac4494]

I think it's T50 but there's one bracing hinge that need to be unbolted using a torx piece. And two main pivot hinges that need to have the pins beaten out. These two are a pain to get to and awkward to remove. It also helps if you have another set of hands to help

 

[GrahamS]

I did this recently and got a pair of molegrips on the bottom of the pin and then hit the molegrips, made the bashing location easier.