Clio 182 Vibrates After Trackday

[kendeba]

Hi Guys,

After a trackday my car started to vibrate while accelerating. This happens after 2k rpms and the power of the vibration depends on how much I accelerate.
Have you ever experienced this issue?
Should I park the car until I find out what the problem is?

Ty for your help!

 

[Bluebeard]

Have you checked your wheel bolts??

 

[Martin_172]

as above, wheel bolts and check the front drive shaft nuts to make sure they are tight, play in the bearings can cause a vibration although its noticed more during cornering

 

[kendeba]

Have you checked your wheel bolts??

Wheel bolts are fine. I use two different wheel sets and the car vibrates with both of them.

 

[kendeba]

as above, wheel bolts and check the front drive shaft nuts to make sure they are tight, play in the bearings can cause a vibration although its noticed more during cornering

The car’s suspension (I think) is fine. There is noticeable vibration while going in neutral.

 

[kendeba]

Maybe the flywheel?

 

[Amos91]

Look at the engine mounts. I’ve snapped the upper gearbox spider thing before.

 

[Martin_172]

The car’s suspension (I think) is fine. There is noticeable vibration while going in neutral.

if your getting it in neutral it could still be a driveshaft/bearing

put it in neutral so its making the vibration and give the car a rev and see if the vibration increases with revs, that will tell you if its somthing after the gearbox or somthing before it

 

[kendeba]

Only vibrates in gear. Must be something around the transmission / clutch.

 

[kendeba]

Look at the engine mounts. I’ve snapped the upper gearbox spider thing before.

Good advice, thank you! I will check it.

 

[powerclio]

did you check the engine mounts?

 

[kendeba]

It was the right driveshaft.

 

[Martin_172]

I'm good ;-)