Correcting headlights

[Nick_P]

Do i have to use something like Plastx or will menzerna IP or FF do? This is after wet flatting them

 

[clvs2222]

same as paint mate, wet sand then with as light grade as you can (3000 megs i used) then using the rotary, IP then FF.

 

[Bash]

Think Jamesstone wrote a how2 guide.

 

[guysy]

Had to sand mine down with 1800, To get the heavy glaze off mine. Followed by 2000 then 3000. Spent quite a bit of time with the rotary.. But they still need some work.

 

[clvs2222]

always start with the highest possible grit, then if your not having any success, change to a lower grit.

 

[Nick_P]

Wicked, cheers team

 

[guysy]

I did, Used a few grits. Had to resort to 1800 because it seemed to be the only thing working. They look fine.. Just a few swirls from the sanding which i will take out when the weather is better.