EBC are saying this for the Orangestuff pads:
Originally Posted by EBC Bedding in procedure Although a pre scorched pad some bedding in is still advisable.
If this were a street legal pad, some earlier driving on the street to fully bed the pads in geometrically to your discs would be good and finish the heat cure in the pad. Steady braking with stops from 60 to 30 MPH for roughly 15 cycles would help a lot for the first bedding followed by 4-6 heavier stops to really get some heat into the pads.The pads MUST be allowed to cool fully preferably overnight.
In Race bedding - After fitting to decent condition discs , drive two laps at moderate speed, braking intermittently.
Then drive two more laps with heavier braking, coasting to a stop and allow pads to fully cool.