Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
I ended up removing all the plastic lips with a stanley knife. then screwed in around 15 self tapper screws in before fitting it (screwed in just enough to hold them into place on the splitter)
lifted up the car masking taped the middle and ends on.
Got the electric screwdriver out and started from the centre working my way out. Had it screwed on within 5 minutes of masking tape it up!
then just used a stanley knife to trim down the ends.