Fogs! :-D

[Zmaster2k]

Alright people

Fitted Bumper and wings the other week now my clio has some wire for what i can only imagine are for fogs? are they?? but i dont have a switch?

 

[Essex_Lad]

whered the wirin come from?

wot bumper u fitted?

 

[Phil 99]

if the wire is near the drivers headlight, then that is the fogs one.

 

[Zmaster2k]

valver bumper but will get rid of that when i get bored

I have 2 wires one under each head light! and they have the same connector on them as the connector on the fogs

i.e they are both male plugs (the one in the car and the ones on the fogs)

will try and get some pics if the digi cam works

 

[Phil 99]

same here. I chopped them off. didnt bother with the clips. take the back cover off the fogs and solder some wire throught the rubber grommits, then solder on to other wire n mask with insulation tape. keep the grommits in, as it stopes water from gettin inside the lights.

 

[Zmaster2k]

did you need a switch ??

how do they come on?? if you havent got a switch??

 

[Phil 99]

yea, take one of fake swiches out of the 2 spare on the right of the steering wheel, behind it is a 6 pin connector. Got my swicth from a scrapped clio in the scrappy. That way it will clip straight in to the connector. that connector is linked to the spare loom in the engine compartment. You also need the relay for the passenger fuse box and the fuse for the auxilery fuse box.

bobs ur uncle the switch will control ur fogs

all i gotta do is link up the tiny bulb in the swicth to come on

 

[Phil 99]

btw, clear ur pms m8. cos when i get some valver oil dials, im gonna need you to explain how u wired them to give the effect they are working - needles movin and lights on etc.

 

[Zmaster2k]

will do

where can i find this relay and what does it look like if iam getting it from a scrappy?

can i get it from infinicar?

if not any chance you could get hold of it for me?

matt

 

[Phil 99]

u can get the relay from the scrappy too. Its a square block shaped thing which connects to the passenger fuse box. not worth much. (pocket job get what i mean ) need to put it in the right slot in the fuse box, just stick it in.

its fits to the 3rd slot in from the right, check a haynes tho to be sure.