scotiamr2t
ClioSport Club Member
Mazda 2, Ph1 172
Looking to see if anyone has had a similar issue.
Fuel level needle goes beyond full and almost rotates 360 degrees. You can get it back to normal position if you leave it a bit then flick the key on an off, it gradually goes back to where it should be. Any ideas what the cause could be?
I thought earth issue so stripped the loom back to check but earth is fine, relay fine. Last thing to check is the sender but was hoping for a simpler solution than removing the sender from the tank
Cheers
Fuel level needle goes beyond full and almost rotates 360 degrees. You can get it back to normal position if you leave it a bit then flick the key on an off, it gradually goes back to where it should be. Any ideas what the cause could be?
I thought earth issue so stripped the loom back to check but earth is fine, relay fine. Last thing to check is the sender but was hoping for a simpler solution than removing the sender from the tank
Cheers