This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
take the back off of it and check that the brushes are still alive. think there are known problems with the speed switches as well, so could be worth disturbing the wiring to the switch to see if that achieves anything
Taking the back off will void any warranty that may left Henry mate.
Pep, do as Matt said, give them a buzz and see what's what before you do anything else. Might be worth letting us know how you get on as well for future reference for anyone else on here.
there aren't any warranty stickers/seals on it (or there weren't on mine) - providing you don't chew the screws up, they'd never know. they'd probably not be all that bothered if they did i wouldn't have thought
it's just a v expensive(!) angle grinder - typical internals
I used to use the G220 mate, went through three replacements before giving up on them, about as reliable as a 2nd gen ipod....... I would buy a rotary, theyre not scary like people seem to make out but you need to get the knack of not leaving holograms everywhere it can be a little difficult at first, you can pick them up very cheaply these days, try silverline or kestrel.
i'm not sure what they'll do if it's so long out of warranty, but worth a call. they had lots of problems with early ones (i'm assuming the later ones are 'fixed' - ?), and were just swapping them without quibble
if no joy, just have a poke around inside it - 2minute job - be a shame to write it off if it's just the brushes or dodgy wiring (you can buy brushes BTW)
Spoke to Megs, gonna send it off to them tomorrow and they're gonna have a look over it.
Said they dont do repairs but going to inspect it for wear and tear, then either return it to me or propose some other course of action. So have to see what they say next week.
Just had a call from Meguiars, said it's out of warranty, but it's one of the dodgy batch they had, and because they can tell it hasn't been abused, they're sending out a brand spanker to me