Gear stick return?

[egor110]

What causes the gear stick to return to the central position? Are there any springs or bushes that can be replaced?

Reason I ask is for a while mine hasn't felt stiff/accurate , its very vague/sloppy.
I'm also able to select reverse without lifting the gear knob up, I just push it across from 1 st and into reverse.
Is this likely to be sorted with a new gear selector or one of those yanos kits?

 

[bloke]

detent spring on the selector arm under the box. more likely to be wear in the white bush it sits in though.

 

[egor110]

Is the detent spring available or do I need a complete selector?
If I got a yanoo stiff shift kit would that fix the worn bush?

 

[bloke]

can get the spring on it's own.

you need to replace the bush.

 

[egor110]

Thanks,
I'll pay a visit to renault tomorrow and get it ordered.

 

[markoc]

Is wear in the white bush common? My self centre isn't as strong as I think it should be.
Anyone have a part number for the bush?

 

[Bear Head]

That's wear in the ball joint mate. The white ball that you can see when you lift the gear gaitor. You need to get a Yanoo stiff shift kit.

 

[egor110]

Right so I'll order a yanos kit and the bottom brass Bush.
Any ideas as to how I can sort out my reverse/first gear issue?
I don't have to lift the gear stick I just push across a bit more from 1st.

 

[Bear Head]

Right so I'll order a yanos kit and the bottom brass Bush.
Any ideas as to how I can sort out my reverse/first gear issue?
I don't have to lift the gear stick I just push across a bit more from 1st.

Think this could be to do with the gear linkage, I'd ask yanoo on a privage message. Reckon the kit would most likely solve this too.