Gearbox bolts. Whats ones go where ?

[D1CKY]

Following on from this thread i have sourced bolts for my gearbox as my originals went astray.

http://www.cliosport.net/forum/show...earbox-Bellhousing-Bolts-What-sizes-do-i-need

My next question is.

What bolt goes where as i have a few of varying lengths.

 

[Dan@SJM]

Top 3 go in the bottom between sump/box.
The lowest 2 go in the very too of the bell housing
Next 3 up go in the starter
The last one I think goes just above the clutch fork

 

[D1CKY]

Top 3 go in the bottom between sump/box.
The lowest 2 go in the very too of the bell housing
Next 3 up go in the starter
The last one I think goes just above the clutch fork

Cheers buddy

Do i have the correct amount of bolts ?

 

[Dave..]

Just a quick tip for anyone reading this, considering taking out the gear box... They all fit around the bell housing in a rough circle.

Best thing you can do is use a piece of card and punch the bolts through in the position they come out. So you end up with something the looks like a clock face, but made of bolts.

 

[Dan@SJM]

Your missing a sump one, and a nut

 

[D1CKY]

Just a quick tip for anyone reading this, considering taking out the gear box... They all fit around the bell housing in a rough circle.

Best thing you can do is use a piece of card and punch the bolts through in the position they come out. So you end up with something the looks like a clock face, but made of bolts.

My mate mentioned he did that with his RX8, bit late now though.
Saying that they went missing after a house move so i dunno if the cardboard would have helped

Does anyone know how many bolts i'm meant to have ?

 

[DannyR]

One above clutch fork should have a 5mm washer on it too.

 

[D1CKY]

Your missing a sump one, and a nut

The nut is there in the pic.

How long is the sump one that i require ?

One above clutch fork should have a 5mm washer on it too.

Cheers Danny, i'll source a washer

 

[Dan@SJM]

Same as the others. Yes there should be 2 nuts

 

[D1CKY]

Same as the others. Yes there should be 2 nuts

Ok cheers

When you say the others ? Do you mean the short ones at the top of the pic ?

I noticed one nut goes on a bolt/stud that sticks out the engine block on the left.

Where does the second nut go ?
Does it go onto one of the bolts in the pic ?
Possibly the one with coned/chamfered/radius end ?
Or does it go on another stud somewhere ?

And does the starter bolts assist in holding the bell housing on ?

 

[BIGASH]

Should be a stud also on the gearbox for the second nut? certainly has been on the three i've seen

 

[D1CKY]

Should be a stud also on the gearbox for the second nut? certainly has been on the three i've seen

Ok cheers mate

 

[D1CKY]

Anyone any pics of the bolt I'm missing ?

 

[Dan@SJM]

Same as the top 3

 

[Fred@BTM]

the one with twin washers goes by the clutch fork

there you be 4 x top one and 2 x nut

 

[Budgie]

Pic to show top bolt orders.

 

[Budgie]

There should be one more long one, with a single washer also. For the top.

 

[Fred@BTM]

that picture is wrong mate, the double washer bolt goes in the hole next to the clutch fork

 

[Budgie]

Really?

That's as it came in to me, span them out and snapped the picture..

Guess that box had been off before then....

 

[Fred@BTM]

yep, we get all sorts it with bolts missing etc

 

[D1CKY]

Cheers guys

So it seems all I'm missing is a sump bolt and a nut .