ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.

H&R Coilovers question



  Clio 172 Cup
DOES ANY ONE KNOW WHERE I CAN GET A SET OF CUSTOM REAR SPINGS TO FIT THE H&R PLATFORMS WHICH LOWER THE REAR OF THE CAR MORE THAN THE STANDARD H&R SPRINGS AND DOES THIS HELP TO SHARPEN UP THE REAR END.
 

TeZ

  Non RS : (
brickwp1024x768copyjc4.jpg
 
Do a search the compnay who makes custom springs has been mentioned before just need to know the dimentions and weight etc you want and they'll make them up.
 
  lift number 1 @ btm
you probably don't want the car any lower than it will sit anyway. if the car is too low your roll centre will effectively be underground, which increases mass leverage and increases understeer. if you want to set the car for driving chances are h&r know what they are doing. if you are building it for looks they might be able to make you some custom springs? god knows how much that would cost though!
 

Ali

  V6, Trackhawk, GTS
DOES ANY ONE KNOW WHERE I CAN GET A SET OF CUSTOM REAR SPINGS TO FIT THE H&R PLATFORMS WHICH LOWER THE REAR OF THE CAR MORE THAN THE STANDARD H&R SPRINGS AND DOES THIS HELP TO SHARPEN UP THE REAR END.

Mate there too short as it is!!!! But yes, spk to yozzasport.
 
  Clio 172 Cup
Have found the company that will do them i just need the spec of them,
i have had my car as low as it will go at the rear now for a long time and i feel that there is still more to be found at the rear its juts not tight enough but i have ordered a rear strut brace ?
 
  Clio 172 Cup
^^ and ? ....
can anyone help me get what i am looking for not convince me of what i dont want or allready have ?


i know your all only trying to help but it can be frustrating.
 

Gaz_

ClioSport Club Member
  Extreme mode
lower won't sharpen it up matey, it probably needs raising tbh......
 
  Clio 172 Cup
Have found the company that will do them i just need the spec of them,
i have had my car as low as it will go at the rear now for a long time and i feel that there is still more to be found at the rear its juts not tight enough but i have ordered a rear strut brace ?


edde just need spec ?
 
  Clio 172 Cup
i belive that there was a group buy at one time on these but this was a few years ago am just hoping that someone somewhere still has some or knows the spec then i can get em made going to H&R would be too expensive i would think.
 
  lift number 1 @ btm
try demon tweeks, they have a range in the motorsport section, or failing that i've seen an add in the back of race and track car for a company, can't remember the name though.
 
  Clio 172 Cup
ill try dt in the morn but they normally want me to come down and have the whole thing set up by the for mega money though.
 
  lift number 1 @ btm
yeah, to be honest i normally use them as a reference and then call the companys direct. lmao.
 


Top