ClioSport.net
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
head gasket bolt torque and angle settings help!!!
- Thread starter spsimon
- Start date
MicKPM
ClioSport Trader
Clio16v/Zoe Z.E.50
Sequence:
8 - 4 - 1 - 5 - 9
7 - 3 - 2 - 6 - 10
All down 20Nm
90 degrees (+/- 6 degrees)
Wait 3 - 5 mins
Slacken bolts 1 & 2 then retighten 20Nm then a further 200 degrees (+/- 6)
Slacken 3, 4, 5 and 6 then retighten 20Nm then a further 200 degrees (+/- 6)
Slacken 7, 8, 9 and 10 then retighten 20Nm then a further 200 degrees (+/- 6)
8 - 4 - 1 - 5 - 9
7 - 3 - 2 - 6 - 10
All down 20Nm
90 degrees (+/- 6 degrees)
Wait 3 - 5 mins
Slacken bolts 1 & 2 then retighten 20Nm then a further 200 degrees (+/- 6)
Slacken 3, 4, 5 and 6 then retighten 20Nm then a further 200 degrees (+/- 6)
Slacken 7, 8, 9 and 10 then retighten 20Nm then a further 200 degrees (+/- 6)
2000 clio 1.4 sport
I have a 2000 clio 1.4 8v and the head gasket needs replacing. I just need to know if i need new head bolts or could i get away with the ones already in it?
Thanks in advance
Thanks in advance
twingo
JamesBryan
ClioSport Club Member
Same order, but the torque is 20Nm, then wait for 10 mins, 20Nm again then wait. Check again then onto 165 degrees.
JamesBryan
ClioSport Club Member
JamesBryan
ClioSport Club Member
180 should be fine really, especially with new bolts.
Similar threads
