head gasket bolt torque and angle settings help!!!

[spsimon]

im replacing the headgasket on my 1.2 8v y reg clio tommorow and in deperate need for the tightening sequence , please help!!

 

[MicKPM]

Sequence:

8 - 4 - 1 - 5 - 9
7 - 3 - 2 - 6 - 10

All down 20Nm
90 degrees (+/- 6 degrees)

Wait 3 - 5 mins

Slacken bolts 1 & 2 then retighten 20Nm then a further 200 degrees (+/- 6)
Slacken 3, 4, 5 and 6 then retighten 20Nm then a further 200 degrees (+/- 6)
Slacken 7, 8, 9 and 10 then retighten 20Nm then a further 200 degrees (+/- 6)

 

[spsimon]

thank you very much!!!

 

[sharrod6860]

I have a 2000 clio 1.4 8v and the head gasket needs replacing. I just need to know if i need new head bolts or could i get away with the ones already in it?
Thanks in advance

 

[Oscar88]

I have a 2000 clio 1.4 8v and the head gasket needs replacing. I just need to know if i need new head bolts or could i get away with the ones already in it?
Thanks in advance

renault specified new head bolts in dialogys, yes

 

[Nerastos]

I have a 2.0 2005 clio sport and I am wondering if the bolt sequence and torque are the same

 

[bloke]

I have a 2.0 2005 clio sport and I am wondering if the bolt sequence and torque are the same

30nm - 30nm +180 deg.

 

[JamesBryan]

I have a 2.0 2005 clio sport and I am wondering if the bolt sequence and torque are the same

Same order, but the torque is 20Nm, then wait for 10 mins, 20Nm again then wait. Check again then onto 165 degrees.

 

[Nerastos]

Thank you both but how can I be sure what is the correct torque and degree angle?

 

[JamesBryan]

Thank you both but how can I be sure what is the correct torque and degree angle?

 

[bloke]

think the 30 was from reinz? could be wrong though, can't really remember. i stick with 30 and 180 because i'm strong ?

 

[JamesBryan]

think the 30 was from reinz? could be wrong though, can't really remember. i stick with 30 and 180 because i'm strong ?

180 should be fine really, especially with new bolts.

 

[Nerastos]

Your info was very helpful thank you very much ?