HELP asap please :)

[Final Maxim]

easy people. ok ive got a Earthquake sub whic on the bottom reads...
IMP 4 ohm
QTS 0.42
VAS 3.8ft
FS 37Hz
RMS 300w


i wanna bid/buy this amp ive seen on ebay.(see below) Could any of you ice experts tell me if this will work fine with my sub? My sub is 4 ohms, the amp is 1 ohm. Does that make a difference? thanks people, know you wont lemme down


http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=3082947147&category=4950http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=3082947147&category=4950

FM

 

[mechachrome]

it should work, best to check with you local car audio place tho, or call one from a magazine or something, they are normally good at helping

i think the amp has a low resistance output, just meaning that it puts out a lot of power? and your sub is 4ohm cos this is a larger resistance speaker?

you can get these new for about £170, so i wouldnt pay above that. if it gets there,

http://www.sonyxplod.co.uk/product.asp?product=19169http://www.sonyxplod.co.uk/product.asp?product=19169

better still ask your local what ex-demo subs they have, normally get a good amp for a cheaper price

 

[Final Maxim]

nice one matey

FM

 

[Final Maxim]

easy people. Ok ive brought this head unit off ebay
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=3083087418&category=3293&sspagename=STRK%3AMEBWN%3AIT&rd=1http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=3083087418&category=3293&sspagename=STRK%3AMEBWN%3AIT&rd=1

ive got a 300w earthquake 12" sub n this amp
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=3082947147&category=4950http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=3082947147&category=4950


ive also brought these tweeters
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=3082762127&category=3292&sspagename=STRK%3AMEBWN%3AIT&rd=1http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=3082762127&category=3292&sspagename=STRK%3AMEBWN%3AIT&rd=1
ive got me a 500 watt amp wirin kit also.


ive never wired a stereo or anythin like this in my life but ima have a go . now, ive been told that head unit will just plug straight in.

i run a wire from amp to battery and a wire from amp to head unit (will this just be 1 wire to the head unit using one of the 4x52w channels?). then 2 wires from amp to both terminals of my sub.

My tweeters im gonna put by my electric window switches in the door pads. Isit fine to just join these to my components in my door speakers? (think theyre 5.25"?)

N do the small 4" (?) speakers next to the parcel shelf run on the same wre as my door speakers. using 2 channels left and right?

i think thats it aint it? have i just made myself look silly or is this pretty much right? any ideas or suggestions much appreciated, cheers

FM