Induction Hose

[Greeny.]

Looking to get a silicon yellow induction hose but £50 for a Samco one seems really expensive for what it is. Anyone know of anyone else retailing the same sort of thing for slightly cheaper?

Cheers

 

[Yellow Dave]

Can always try a simple 90' bend and fit a seperate breather. large bends can be had off ebay for less than £20. I bought a 100mm dia 45' bend for £16.

 

[geesus69]

i got a cheap 45' hose and then used one of these for the breather

http://www.merlinmotorsport.co.uk/p10760/SELF-SEALING-TEE-WITH-16mm-PUSH-ON/product_info.html

 

[Greeny.]

Thanks guys

 

[richy22]

Or www.kamracing.co.uk

Might not have a yellow one though but I got my blue 70mm one for my induction bit from there.

Then fitted a breather filter on the crappy waste pipe that attached to the inlet.

 

[richy22]

http://www.auto-performance.co.uk/index.php?cPath=22_39

Also do 90 degree bends..but not in yella

I bought one of these...

http://www.kamracing.co.uk/universa...end-105:4fa201ff93470c8e55e63cbcceea5bab.html

Did have to trim about 10mm off one end but thats because Iwanted to get the Viper further away from the front of the car.

Then fitted one of these onto the pipe that ran to the oil breather place.

http://www.auto-performance.co.uk/index.php?cPath=37_78

although I did run without it for months and never had any problems or oil leaking etc...just fitted one for piece of mind

 

[Greeny.]

What ID is the standard hose/throttle body? Wanna order one but my car isnt at work

 

[172Ben]

70mm iirc

 

[geesus69]

yep 70mm

 

[Greeny.]

Thank you

<3 Cliosport