K-Tec exhaust help!

[AshleyWatters]

Hello, I currently own a Mk2 1.2 Renault Clio Dyanmique and i am in the process of fitting a 182 rear bumper to improve the aesthetics of my car. i have been looking at exhausts and cannot find a twin exhaust that will fit a 182 bumper and be able to fit a 1.2 clio!

I have looked at the K-Tec exhaust, but apparently it doesnt line up or something :/

Can someone please help me and inform me of a exhaust which will fit??

Thanks Ash

 

[2 live]

Try powerflow mate. Theyl make you a s/s one to your requirements. And better quality than the Ktec too in my experience

 

[Dan519]

hahahahahahahaah powerflow and quality in the same sentence.......ahahahahahahahahaha

 

[2 live]

my powerflow has lasted me 10 years.my ktec...errr....less than 5 months....take from that what you will.


but then the powerflow was fitted in burnley. which is about the best outlet in the country it seems. pretty much all the old skool quick cars ran them, and from the same outlet. although as you point out, the quality of their work from some outlets is disgusting. but still better than ktec...................

 

[2 live]

ktec quality...... eh??????

 

[Craig Ed]

Do janspeed not make them for ktec?

 

[Tony Hunter]

Yes.

 

[Dan519]

my powerflow has lasted me 10 years.my ktec...errr....less than 5 months....take from that what you will.

now if you tell the actual truth, instead of the manipulated lie version, it turns out you bought the car with it already fitted, and it's of an unknown age


FYI, the powerflow branch I worked for (and walked out as it was an utter s**t job) set aside EVERY afternoon for warranty work, most of which was hangers broken off. It's an exhaust, and metal fatigues, live with it

 

[Tony Hunter]

Lol.

 

[2 live]

now if you tell the actual truth, instead of the manipulated lie version, it turns out you bought the car with it already fitted, and it's of an unknown age


FYI, the powerflow branch I worked for (and walked out as it was an utter s**t job) set aside EVERY afternoon for warranty work, most of which was hangers broken off. It's an exhaust, and metal fatigues, live with it

yes the car was bought with it on..but it has lasted ME 5 months. the exhaust is circa 12 months old, warranty invalid due to change of ownership. if you read the post correctly in the 1st place rather than trying to read between the lines and spouting s**t sticking up for your mates.......


and yes metal fatigues...but the weld to start with was utter garbage on the hanger. looked like it had been welded by a blind thalidomide.

and as i said before. yes quite a lot of powerflow garages are crap, you obviously worked in one of those. and again, as said before, mines been on the williams for 10 years minimm, and the hangers have never broken, the quality of the s/s could be better yes, but its still going strong and has never been repaired.

quite a difference wouldnt you say??