Milltek straight through pipe, where?

[Italian_Job]

I've got a Milltek fitted, I'd like to replace the middle resonator with a straight through pipe.
Where can I order it and how much does it cost?

Cheers!

 

[Christopher]

I had mine replaced at JP Exhausts.

Any decent exhaust centre should be able to sort you out. It's not challenging.

 

[Italian_Job]

Good, I thought I had to get a Milltek one (before I realised it doesn't exist).
thanks

 

[alexrobinson202]

I got the centre section of my Ktec exhaust cut out at a local Powerflow exhaust place the other day, cost £60 inc materials (stainless), only took an hour and they did a good job!

 

[Gouldy]

Long life exhausts have done this in the past for me. Although the last time I removed the centre silencer From an exhaust system I did it my self. It cost me a fiver for a section of 316 grade stainless tube. Stainless is quite cheap for exhausts. It's about £11 a metre. And if you are handy with a grinder and a mig / tig welder then it's easy.

 

[alexrobinson202]

Long life exhausts have done this in the past for me. Although the last time I removed the centre silencer From an exhaust system I did it my self. It cost me a fiver for a section of 316 grade stainless tube. Stainless is quite cheap for exhausts. It's about £11 a metre. And if you are handy with a grinder and a mig / tig welder then it's easy.

I guess the only benefit of getting an exhaust place to do it is that they can flare the end of the tube so it fits over the old one slightly to make a better join?

 

[Italian_Job]

does the sound change much without resonator?

 

[Gouldy]

I guess the only benefit of getting an exhaust place to do it is that they can flare the end of the tube so it fits over the old one slightly to make a better join?

no because both joints are welded anyway, its not the sleeve exhaust joint that clamps round with a u bolt