What's new
By:
ClioSport.net

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.

Milltek.

Very few, a few more if you put a decat on it as well.

Edit: turns out very little was optimistic. Will sound good though.
 
Thing is...I dont like the sound of the Yozzasport one. To me it sounds a bit too brash. Im gonna go Milltek. Ive done alot of online research and it seems that most people are delighted with them. Its not really noise im after just a good aftermarket exhaust.
 
seen a few suspect welds on recent milteks but i had one on my golf a few years back and didnt have any issues....
guess it may have just been a bad batch???!!
 
You see i heard that Milltek were the only company that use a proper rolling road to develop their exhaust systems...
 
mat-nos said:
seen a few suspect welds on recent milteks but i had one on my golf a few years back and didnt have any issues....
guess it may have just been a bad batch???!!
Click to expand...

i have had 2 mk4 golf anniversary's both with miltek systems and its the only 1 i would use on a golf
 
BenadetH said:
You see i heard that Milltek were the only company that use a proper rolling road to develop their exhaust systems...
Click to expand...

I very much doubt that. Regardless if they use a rolling road or not, an exhaust isn't going to give you any power. It's all about sound, look and build quality. The milltek has the first two covered well, but there are others with better build quality.

Having said that, a mate of mine used to have a milltek on his st and it was brilliant for two years. Faultless.
 
I have got a milltek had it on for a year. Personal i think its brilliant never had a problem also sounds nice, not to loud. Don't forget you get a liftime guarantee!
 
Last edited:
BenadetH said:
You see i heard that Milltek were the only company that use a proper rolling road to develop their exhaust systems...
Click to expand...

loads of companies do. Supersprint rolling road test each one, Janspeed have a rolling road. Even we send vehicles to a rolling road when developing most exhaust parts. For example our Lupo GTI exhaust manifold got a healthy 10bhp. Its certainly better than plucking a figure out of thin air.
 
having a decat usually means you have the cat safe in the garage 364 days of the year and 1 day fitted to your car..
 
The advantage of the ktec ones is that they are renault specialists... Their attentions isn't spread between many brands and car makers. That has to result in a more thoroughly developed product I would imagine.
 
AHHHH this is doing my nut!!! Janspeed, K-tec, Magnex, Yozza, milltek...WHICH f**king ONE!?!!?!? I want it to sound beefy without soundling the idiots in their honda chav-ics that want a silly boy racer exhaust note!! I also want quality and reliability!
 
I love my Miltek, when it sits right it's the best looking IMO. Fills the cut outs nicely. Had no quality problems either, seems fine to me.
 
BenadetH said:
AHHHH this is doing my nut!!! Janspeed, K-tec, Magnex, Yozza, milltek...WHICH f**king ONE!?!!?!? I want it to sound beefy without soundling the idiots in their honda chav-ics that want a silly boy racer exhaust note!! I also want quality and reliability!
Click to expand...

As long as you keep your cat none of them will be too silly on the volume side of things.
Tbh, you're never going to get a definitive answer on a forum, people like different things and have their own experiences with certain manufacturers.

Your best bet is to have a look at pictures, videos on YouTube etc and make your decision.
 
I have a Miltek on my 182, not had any probs.. Sound is not loud, very subtle which is what I wanted..
 
i am to after a exhaust and after all of my research i think the supersport ktr is the one for me, would love a yozza but no one seems arsed to make them anymore
 
more than a year with the milltek now and it's fine. they had problems with the welds in the past, I asked them about this and there was a bad batch. anyway, the guys who experienced problems got their parts replaced under warranty, so customer service is spot on. it sounds the way you want to and the tail pipes look good
Having said that if money were no problem I'd buy a BTB or a yozza which are a bit more expensive.
BTB because I like the way the bends in the pipework are made
yozza because obviously it's the best rated here.
Between the BTB and the yozza the BTB will sound deeper if that's what you're after
OR if I'd be a billionaire I'd get an orbisound for abot 1k :D (don't know if they're still available)
 
I searched for months looking for the orbisoud exhaust when I was looking at which Clio to buy, couldn't find one anywhere. Either they're not for sale or they're very well hidden. I tested a 182 with a milltek and it sounded gorgeous, so if they've sorted the welding issue, you can't really go wrong.
 
You must log in or register to reply here.

Similar threads

E
How much are you guys spending on cats for MOTs? Where do you get them?
Replies
14
Views
1K
ExtraSmallBees
E
TrackerMan
De-Cat Options for MOT
Replies
24
Views
3K
JamesBryan
JamesBryan
ex-Chinese Dave
F4R 172 Cup engine questions
Replies
28
Views
3K
ex-Chinese Dave
ex-Chinese Dave
Mertin
Cat cams exhaust pulley stud
Replies
8
Views
1K
Mertin
Mertin
Jenko606
Cams Advice
Replies
2
Views
1K
Jenko606
Jenko606
Back
Top