Megane R26
Forgive me, for I have sinned!
I've not touched my car since my time down with Kelly@KDS in December, and it was looking a little sorry for itself so I spent today giving it a bit of love and adding some protection to it.
DSC02338 by RussZS, on Flickr
DSC02320 by RussZS, on Flickr
Beading from the C2 was a bit flat too...
DSC02318 by RussZS, on Flickr
As always, wheels were dealt with first:
DSC02316 by RussZS, on Flickr
DSC02317 by RussZS, on Flickr
DSC02340 by RussZS, on Flickr
DSC02332 by RussZS, on Flickr
AS Smart Wheels (new formula) was used via EZ and Swissvax brushes, then IronX to follow:
DSC02325 by RussZS, on Flickr
DSC02341 by RussZS, on Flickr
Next the car was foamed with BH Auto Foam:
DSC02344 by RussZS, on Flickr
Whilst the foam was dwelling, the shuts and sills were treated with Surfex HD:
DSC02346 by RussZS, on Flickr
Auto Finesse Lather was up next:
DSC02347 by RussZS, on Flickr
DSC02348 by RussZS, on Flickr
and rinsed...
DSC02350 by RussZS, on Flickr
Pulled inside to dry properly:
DSC02351 by RussZS, on Flickr
After drying, it was time to decide which LSP to apply to the car. I'd recently picked up a pot of the new flagship Auto Finesse Wax - Wraith, which will be the new range topper above Spirit. I definitely wanted to test this out, and decided to go for a 50/50 split between this and Swissvax Crystal Rock. Obviously CR will be about 4x more expensive, so it's not exactly a fair test, but could well be interesting to see how the two compare.
The matching pre wax cleansers were also used, and applied via DA and 3M Waffle Pad:
DSC02354 by RussZS, on Flickr
The drivers half of the car was topped with CR, and the passengers' with Wraith:
DSC02355 by RussZS, on Flickr
DSC02357 by RussZS, on Flickr
Curing:
DSC02358 by RussZS, on Flickr
DSC02359 by RussZS, on Flickr
and removed:
DSC02361 by RussZS, on Flickr
DSC02366 by RussZS, on Flickr
Next the CR side was applied and removed and I turned my attention to the exhaust.
DSC02423 by RussZS, on Flickr
It was looking rather sorry for itself to say the least!!
So out came the Mercury and a CostCo MF Cloth:
DSC02424 by RussZS, on Flickr
DSC02425 by RussZS, on Flickr
2 mins work and just an MF:
DSC02426 by RussZS, on Flickr
DSC02427 by RussZS, on Flickr
The number plates were next. I'd recently bought some pressed plates from Alex at Elite, so I decided to add these today:
Original plate:
DSC02415 by RussZS, on Flickr
Removed:
DSC02416 by RussZS, on Flickr
Cleaned with IPA:
DSC02417 by RussZS, on Flickr
New plate!
DSC02418 by RussZS, on Flickr
DSC02419 by RussZS, on Flickr
Same with the rear:
DSC02420 by RussZS, on Flickr
After:
DSC02421 by RussZS, on Flickr
DSC02422 by RussZS, on Flickr
and now for some finished shots (some taken before the plate swap)
DSC02384 by RussZS, on Flickr
DSC02386 by RussZS, on Flickr
DSC02392 by RussZS, on Flickr
DSC02396 by RussZS, on Flickr
DSC02397 by RussZS, on Flickr
DSC02398 by RussZS, on Flickr
DSC02399 by RussZS, on Flickr
DSC02401 by RussZS, on Flickr
DSC02402 by RussZS, on Flickr
DSC02404 by RussZS, on Flickr
DSC02405 by RussZS, on Flickr
DSC02408 by RussZS, on Flickr
DSC02409 by RussZS, on Flickr
DSC02429 by RussZS, on Flickr
DSC02432 by RussZS, on Flickr
DSC02435 by RussZS, on Flickr
DSC02436 by RussZS, on Flickr
DSC02437 by RussZS, on Flickr
Orange peel free!
DSC02438 by RussZS, on Flickr
Not a bad finish given that there was no sun out...
DSC02439 by RussZS, on Flickr
Both waxes impressed me deeply and were a pleasure to use. I'll keep this thread updated with thought and videos of beading and sheeting. Mercury was awesome yet again too and replaces Optimum Metal Polish in my collection.
Next from Midlands Car Care is this...
DSC02313 by RussZS, on Flickr
DSC02315 by RussZS, on Flickr
Enhancement Detail with Crystal Rock...
Thanks for looking.
Russ.
I've not touched my car since my time down with Kelly@KDS in December, and it was looking a little sorry for itself so I spent today giving it a bit of love and adding some protection to it.
DSC02338 by RussZS, on Flickr
DSC02320 by RussZS, on Flickr
Beading from the C2 was a bit flat too...
DSC02318 by RussZS, on Flickr
As always, wheels were dealt with first:
DSC02316 by RussZS, on Flickr
DSC02317 by RussZS, on Flickr
DSC02340 by RussZS, on Flickr
DSC02332 by RussZS, on Flickr
AS Smart Wheels (new formula) was used via EZ and Swissvax brushes, then IronX to follow:
DSC02325 by RussZS, on Flickr
DSC02341 by RussZS, on Flickr
Next the car was foamed with BH Auto Foam:
DSC02344 by RussZS, on Flickr
Whilst the foam was dwelling, the shuts and sills were treated with Surfex HD:
DSC02346 by RussZS, on Flickr
Auto Finesse Lather was up next:
DSC02347 by RussZS, on Flickr
DSC02348 by RussZS, on Flickr
and rinsed...
DSC02350 by RussZS, on Flickr
Pulled inside to dry properly:
DSC02351 by RussZS, on Flickr
After drying, it was time to decide which LSP to apply to the car. I'd recently picked up a pot of the new flagship Auto Finesse Wax - Wraith, which will be the new range topper above Spirit. I definitely wanted to test this out, and decided to go for a 50/50 split between this and Swissvax Crystal Rock. Obviously CR will be about 4x more expensive, so it's not exactly a fair test, but could well be interesting to see how the two compare.
The matching pre wax cleansers were also used, and applied via DA and 3M Waffle Pad:
DSC02354 by RussZS, on Flickr
The drivers half of the car was topped with CR, and the passengers' with Wraith:
DSC02355 by RussZS, on Flickr
DSC02357 by RussZS, on Flickr
Curing:
DSC02358 by RussZS, on Flickr
DSC02359 by RussZS, on Flickr
and removed:
DSC02361 by RussZS, on Flickr
DSC02366 by RussZS, on Flickr
Next the CR side was applied and removed and I turned my attention to the exhaust.
DSC02423 by RussZS, on Flickr
It was looking rather sorry for itself to say the least!!
So out came the Mercury and a CostCo MF Cloth:
DSC02424 by RussZS, on Flickr
DSC02425 by RussZS, on Flickr
2 mins work and just an MF:
DSC02426 by RussZS, on Flickr
DSC02427 by RussZS, on Flickr
The number plates were next. I'd recently bought some pressed plates from Alex at Elite, so I decided to add these today:
Original plate:
DSC02415 by RussZS, on Flickr
Removed:
DSC02416 by RussZS, on Flickr
Cleaned with IPA:
DSC02417 by RussZS, on Flickr
New plate!
DSC02418 by RussZS, on Flickr
DSC02419 by RussZS, on Flickr
Same with the rear:
DSC02420 by RussZS, on Flickr
After:
DSC02421 by RussZS, on Flickr
DSC02422 by RussZS, on Flickr
and now for some finished shots (some taken before the plate swap)
DSC02384 by RussZS, on Flickr
DSC02386 by RussZS, on Flickr
DSC02392 by RussZS, on Flickr
DSC02396 by RussZS, on Flickr
DSC02397 by RussZS, on Flickr
DSC02398 by RussZS, on Flickr
DSC02399 by RussZS, on Flickr
DSC02401 by RussZS, on Flickr
DSC02402 by RussZS, on Flickr
DSC02404 by RussZS, on Flickr
DSC02405 by RussZS, on Flickr
DSC02408 by RussZS, on Flickr
DSC02409 by RussZS, on Flickr
DSC02429 by RussZS, on Flickr
DSC02432 by RussZS, on Flickr
DSC02435 by RussZS, on Flickr
DSC02436 by RussZS, on Flickr
DSC02437 by RussZS, on Flickr
Orange peel free!
DSC02438 by RussZS, on Flickr
Not a bad finish given that there was no sun out...
DSC02439 by RussZS, on Flickr
Both waxes impressed me deeply and were a pleasure to use. I'll keep this thread updated with thought and videos of beading and sheeting. Mercury was awesome yet again too and replaces Optimum Metal Polish in my collection.
Next from Midlands Car Care is this...
DSC02313 by RussZS, on Flickr
DSC02315 by RussZS, on Flickr
Enhancement Detail with Crystal Rock...
Thanks for looking.
Russ.