Mydylan spacers with camber

[BuCkLeY...]

Looking to get some do I need longer bolts? How do they fit on? And any use reviews

Thanks

 

[imprezaworks]

No idea. Is that the make? Anything above 5mm you need longer bolts

 

[BuCkLeY...]

Mad I think for short and dunno seem ok priced tbh. Need fronts to but dunno what size yet

 

[imprezaworks]

H@r are pretty good. What size do you think you will need?

 

[BuCkLeY...]

Maybe 5mm or 10 picking my turini from the paint shop next week so was gonna do together. But unsure if need bigger bolts etc

Just read pms do 5 mm spacers so dunno

 

[imprezaworks]

Anything above 5 you will. Hub centric spacers start at 13mm iirc.

 

[BuCkLeY...]

5mm ent gonna effect the bearings will they?

 

[imprezaworks]

Nope. what et are the wheels?

 

[BuCkLeY...]

Genuine cup ones dunno what that is lol

 

[imprezaworks]

i think 42 but maybe wrong. stick them on an see what they look like.

 

[BuCkLeY...]

Hmm I'll check long wait for um to get painted :,(

 

[imprezaworks]

Once on you will have a better idea on size. Mine looks better with 5mm spacers but drives better without. My wheels are 38 for referance

 

[Jekyll]

With camber? Are you on about for the rear?

 

[imprezaworks]

Ah misread the heading. Are we on about the rear

 

[JamesBryan]

Rear camber shims he's on about.

You might not need longer bolts, but the ones currently in there won't come out without a fight usually. So you may need replacements anyway.

 

[BuCkLeY...]

Ye sorry sorry rears but fronts on payday too

These

 

[JamesBryan]

Pure Motorsport do them as a kit with the bolts too, but they're not camber ones.

You'd need to get the camber shims as well.

Spacers
http://www.pure-motorsport.co.uk/details.php?itemid=263&model=6

Shims
http://www.pure-motorsport.co.uk/clio_shop.php?cat=1&model=6&page=6

 

[Jekyll]

You will need these if your going to do the rear hub spacers with camber like in your screenshot.

http://m.ebay.co.uk/itm/SET-OF-BOLT...RS-172-182-CUP-SPORT-/141990365269?nav=SEARCH

They are from the same company so I'm sure it'll be one postage price if you order at the same time.

 

[BuCkLeY...]

Thanks both will order when I home. We're do this fit? Take rear discs off then... and is camber a good idea looks good but don't want problemo lol

 

[Adam G]

Better to turn the nut on the rear whilst just holding the torx on the front, rather than just trying to turn the torx head when removing the bolts as the head can strip. The originals can be reused but probably better to buy the new set.

 

[Jekyll]

Take the rear disc off (remember to take not on which way the washer behind the disc goes)

Remove the 4 rusted bolts out. May need a grinder as they'll more than likely be seized and they are torx style bolts.

Once removed the hub will be loose so you can fit the new spacers amd replace with the new bolts.

Disc washer and disc back on and hub nut done up to 175nm.

 

[BuCkLeY...]

Thanks guys life savers again thanks c.s

 

[BuCkLeY...]

One last question do u just put on or do I need to remove old one etc

 

[imprezaworks]

Hasn't got any mate. Do just that one

 

[cs_dave]

One last question do u just put on or do I need to remove old one etc

Just put them between stub and beam job done

 

[Jekyll]

Yep!

They don't have any in there as standard.

 

[STEVE.M]

The MAD 10mm spacers I bought 2 years ago were supplied with longer bolts,new washers & nuts.

I see they are sold separately now on eBay.£9.99

http://www.ebay.co.uk/itm/SET-OF-BO...l:Clio&hash=item210f490855:g:Ce0AAOSwInxXNFhf